ZC question From OBD1 to OBD0
#1
Junior Member
Thread Starter
Join Date: Sep 2005
Location: Bluefield,WV
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
ZC question From OBD1 to OBD0
At the possibility of actualy getting a NOn-vtec OBD1 SOHC ZC for cheaper than a OBD0 ZC. Im under the imprssion that I can swap my Stock Si harness onto the OBD1 ZC with the exception of the Dizzy, Could I then just grap a rywire or hasport OBD0 to OBD1 dizzy adapter harness? And then still use my stock harness until I make (if ever) the full swap to OBD1?
This would also allow me to get a slightly newer motor.
Thanks...Laterz...
This would also allow me to get a slightly newer motor.
Thanks...Laterz...
#2
Honda-Tech Member
Join Date: Sep 2002
Location: colorado springs, co, usa
Posts: 5,643
Likes: 0
Received 28 Likes
on
28 Posts
Re: ZC question From OBD1 to OBD0 (Angry)
OBD1 distributor will not work with OBD0 ECU - use your Si harness, but you will need to use OBD0 distributor
better check out what the engine is - all of the OBD1 SOHC non-VTEC ZCs that we have seen are the dual carb model (may be why it is cheaper)
better check out what the engine is - all of the OBD1 SOHC non-VTEC ZCs that we have seen are the dual carb model (may be why it is cheaper)
#3
Junior Member
Thread Starter
Join Date: Sep 2005
Location: Bluefield,WV
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Re: ZC question From OBD1 to OBD0 (Angry)
Ahh..I see...I might just go over to OBd1 comepletely and then swap in a Z6 or something or ZC v-tech...Hmm..More thinking and research...
Thread
Thread Starter
Forum
Replies
Last Post
crxzcracer
Honda CRX / EF Civic (1988 - 1991)
6
03-02-2005 03:39 PM
Jon Black
Honda CRX / EF Civic (1988 - 1991)
1
03-12-2003 12:36 PM