Where could i tap the ITP sensor?? *pic*
#1
Member
Thread Starter
Join Date: Mar 2002
Location: South Burbs of, IL
Posts: 1,634
Likes: 0
Received 0 Likes
on
0 Posts
Where could i tap the ITP sensor?? *pic*
as you may know I'm doing the Y8 intake mani swap, and on my a6 mani it got the ITP sensor. On the Y8 on the other hand, it doesn't have one correct me if i'm wrong pees.. Now my question is where is the best place i could tap this baby? Here is the pic what I'm talking about.. Your input will be greatly apprecaited..
[Modified by 4thGSi, 8:46 PM 12/4/2002]
[Modified by 4thGSi, 8:46 PM 12/4/2002]
#2
Honda-Tech Member
Join Date: Feb 2002
Location: BC
Posts: 5,723
Likes: 0
Received 0 Likes
on
0 Posts
Re: Where could i tap the ITP sensor?? *pic* (4thGSi)
Don't tap it into the manifold, just drill a hold in your intake, stock tubing, whatever it is. Don't screw up a perfectly good Y8 manifold.
#3
Honda-Tech Member
Join Date: Jul 2002
Location: Or e gun, usa
Posts: 1,258
Likes: 0
Received 0 Likes
on
0 Posts
Re: Where could i tap the ITP sensor?? *pic* (4thGSi)
just hook it to a vaccum line... tee it off soem thing.. you take out the whole senso then it should read vaccum under pressure... thats how we did it on a 93 si hatch with a 00 b16 and 98 type r engine harness
#4
Junior Member
Join Date: Nov 2001
Location: Sacramento area, CA
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Re: Where could i tap the ITP sensor?? *pic* (Mr. S)
I tapped mine in the center of core plug. Also drilled two small holes, tapped and reused the originaL screws. Almost looks factory and if you happend to screw up I would bet you could pick up another core plug from a machine shop.
#6
Member
Thread Starter
Join Date: Mar 2002
Location: South Burbs of, IL
Posts: 1,634
Likes: 0
Received 0 Likes
on
0 Posts
Re: Where could i tap the ITP sensor?? *pic* (Mr. S)
Don't tap it into the manifold, just drill a hold in your intake, stock tubing, whatever it is. Don't screw up a perfectly good Y8 manifold.
#7
Member
Thread Starter
Join Date: Mar 2002
Location: South Burbs of, IL
Posts: 1,634
Likes: 0
Received 0 Likes
on
0 Posts
Re: Where could i tap the ITP sensor?? *pic* (ef civic)
i thought that the y8 does have one itp [ is that the intake temperture sensor?
Trending Topics
#9
Honda-Tech Member
Join Date: Apr 2002
Location: 32514, fl, usa
Posts: 4,147
Likes: 0
Received 0 Likes
on
0 Posts
Re: Where could i tap the ITP sensor?? *pic* (4thGSi)
Don't tap it into the manifold, just drill a hold in your intake, stock tubing, whatever it is. Don't screw up a perfectly good Y8 manifold.
Yeah, i'm staying away of doing that route.. That's why i need your opinions guys.. So i can drill a hole in my AEM intake tube is that what you trying to say?
Yeah, i'm staying away of doing that route.. That's why i need your opinions guys.. So i can drill a hole in my AEM intake tube is that what you trying to say?
picture
[Modified by d357r0y, 1:27 PM 12/5/2002]
[Modified by d357r0y, 1:42 PM 12/5/2002]
#10
Member
Thread Starter
Join Date: Mar 2002
Location: South Burbs of, IL
Posts: 1,634
Likes: 0
Received 0 Likes
on
0 Posts
Re: Where could i tap the ITP sensor?? *pic* (d357r0y)
Don't tap it into the manifold, just drill a hold in your intake, stock tubing, whatever it is. Don't screw up a perfectly good Y8 manifold.
Yeah, i'm staying away of doing that route.. That's why i need your opinions guys.. So i can drill a hole in my AEM intake tube is that what you trying to say?
yes, i have my stock air junks on.. i tapped into the bottom side of mine.. it looks stock still if you want a picture of it, let me know and ill send you one. bling bling..
Yeah, i'm staying away of doing that route.. That's why i need your opinions guys.. So i can drill a hole in my AEM intake tube is that what you trying to say?
yes, i have my stock air junks on.. i tapped into the bottom side of mine.. it looks stock still if you want a picture of it, let me know and ill send you one. bling bling..
#11
Re: Where could i tap the ITP sensor?? *pic* (4thGSi)
yo cuz you can put it in ur aem tube remember the tube that we close when we put the breather you can put it there.....christmas is past approaching
#13
Member
Thread Starter
Join Date: Mar 2002
Location: South Burbs of, IL
Posts: 1,634
Likes: 0
Received 0 Likes
on
0 Posts
Re: Where could i tap the ITP sensor?? *pic* (d357r0y)
bump
#14
Honda-Tech Member
Join Date: Apr 2002
Location: 32514, fl, usa
Posts: 4,147
Likes: 0
Received 0 Likes
on
0 Posts
Re: Where could i tap the ITP sensor?? *pic* (4thGSi)
no. no codes at all.. works fine. im sure the temp of the air is a little cooler there than the intake manifold too.. so it could possibly mean a slight power gain.
just make sure you dont make the hole too big for the sensor. i made mine a tight fit and then pushed it in and used 2 little bolts/nuts to secure it.
just make sure you dont make the hole too big for the sensor. i made mine a tight fit and then pushed it in and used 2 little bolts/nuts to secure it.
#15
Member
Thread Starter
Join Date: Mar 2002
Location: South Burbs of, IL
Posts: 1,634
Likes: 0
Received 0 Likes
on
0 Posts
Re: Where could i tap the ITP sensor?? *pic* (d357r0y)
no. no codes at all.. works fine. im sure the temp of the air is a little cooler there than the intake manifold too.. so it could possibly mean a slight power gain.
just make sure you dont make the hole too big for the sensor. i made mine a tight fit and then pushed it in and used 2 little bolts/nuts to secure it.
just make sure you dont make the hole too big for the sensor. i made mine a tight fit and then pushed it in and used 2 little bolts/nuts to secure it.
[Modified by 4thGSi, 11:57 AM 12/5/2002]
#16
Re: Where could i tap the ITP sensor?? *pic* (4thGSi)
#17
Honda-Tech Member
Join Date: Apr 2002
Location: 32514, fl, usa
Posts: 4,147
Likes: 0
Received 0 Likes
on
0 Posts
Re: Where could i tap the ITP sensor?? *pic* (4thGSi)
.Cool! What kind of tb did you used on your y8? I got a teg 91 ls tb and I noticed that the choker or floater that adjust the rpm when it's warm it has different hole on the bolt hole for the teg tb.. I might just drill another hole so i can use my a6 choker whatever you call that thing..
Thread
Thread Starter
Forum
Replies
Last Post
LilCivic04
Honda Civic / Del Sol (1992 - 2000)
1
07-23-2006 10:47 PM
wwwaskouniversitynet
Honda Civic / Del Sol (1992 - 2000)
7
05-31-2005 03:52 PM
MrTodd
Honda CRX / EF Civic (1988 - 1991)
2
08-01-2002 10:07 PM