roterx7

i need some new gasket/o-rings around my injectors, can stand to see gasket maker around it. where can i get some or order some for cheap? 89 crx si w/ sohc zc
thanks

haroldthefly91crx

same problem, i took an injector to one of my local auto parts stroes and they had a box full of o-rings and **** and it worked out great and just to make sure it sealed i used some sylicone

eda6

cheapest route is the junkyard. make sure you dip them in oil before installing.

sohcvtec91hatch

Any auto parts store, But it's not cheap like 10 bucks an injector atleast. <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eda6 &raquo;</TD></TR><TR><TD CLASS="quote"> make sure you dip them in oil before installing.

</TD></TR></TABLE>

Crx Jimmy

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sohcvtec91hatch &raquo;</TD></TR><TR><TD CLASS="quote">Any auto parts store, But it's not cheap like 10 bucks an injector at least. </TD></TR></TABLE>

what? 10 bucks an injector for a o-ring you can get a box of them for that price! just buy them from honda they are like a couple bucks if that, and dont use any kind of silicone anywhere near the fuel system. the fuel rapidly decomposes silicone and turns it gummy and if that gets in the fuel system have some real fun trying to ever get it all out

jdm_ef9_b16

why not go to honda?

s10cky

I paid like 45 bucks after tax for all the new 0-rings. It was worth it though.

1 Fly SI

get a assortment of o-rings from the auto parts store. T<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Crx Jimmy &raquo;</TD></TR><TR><TD CLASS="quote">

what? 10 bucks an injector for a o-ring you can get a box of them for that price! just buy them from honda they are like a couple bucks if that, and dont use any kind of silicone anywhere near the fuel system. the fuel rapidly decomposes silicone and turns it gummy and if that gets in the fuel system have some real fun trying to ever get it all out </TD></TR></TABLE>here are some in there that fit.

sohcvtec91hatch

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by s10cky &raquo;</TD></TR><TR><TD CLASS="quote">I paid like 45 bucks after tax for all the new 0-rings. It was worth it though.</TD></TR></TABLE>

See that's what I'm talkin about. I'm sure you could go to home depot and put any o ring on there, but i'm talkin aobut the actual replacement parts.

crx_si-r

yea i work at a CSK (Checker, Shucks, Kragen auto parts depends where u live) n i bought the beck n arnley injector seal kit comes with 3 orings and the seal that goes inside the intake manifold for $8each

DaX

iTrader: (1)

Injector seals are about $7 ea from the dealership.

thesmogman

I just got delivered the set for all four from the dealer. $35 bucks

There are three seal's per injector. And only one is an O-ring.
Here are the P/N#'s
#91301-PM7-003 O-ring
#16473-P10-A01
#16472-P10-A01

There you go.

fireant

You shouldn't need to replace the expensive "cushions". The tiny injector o-rings themselves add up to like $10 or so for all four at Honda.

thesmogman

Shouldn't..... Well I believe that if you are there already, might as well. Also the ones that are in there are 19 years old.

PS: look below.

CrXThang

I got mine at this place called Quality Auto. A kit for each injector is 6 bucks. Heres the number 17148906687

1QuikSOHCZC

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eda6 &raquo;</TD></TR><TR><TD CLASS="quote">cheapest route is the junkyard. make sure you dip them in oil before installing.

</TD></TR></TABLE>


wow i got mine from honda. i would never get anything like that from a junkyard

Fezzie

honda dealership

sohcvtec91hatch

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by crx_si-r &raquo;</TD></TR><TR><TD CLASS="quote">yea i work at a CSK (Checker, Shucks, Kragen auto parts depends where u live) n i bought the beck n arnley injector seal kit comes with 3 orings and the seal that goes inside the intake manifold for $8each</TD></TR></TABLE> That's a discounted price i'm sure! Anyways just buy the kit, or whatever you think will work if it works out using the o-ring off of your old weed pipe then it works. The best bet is a replacement part.

fireant

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fireant &raquo;</TD></TR><TR><TD CLASS="quote">You shouldn't need to replace the expensive "cushions". The tiny injector o-rings themselves add up to like $10 or so for all four at Honda.</TD></TR></TABLE>

LOL, I must confess I did pay $50 to replace all mine too, but after seeing it all apart, the o-rings were crumbling trash, while the cushions looked like the new ones I'd already bought.

TIP: Old injector cushions fit perfectly onto the gearshift shaft to support a sagging shift boot.

roterx7

thats what i was afriad of, very pricey for 4 rubber o-rings for my injectors. Quality Auto, is there a website for them?

sohcvtec91hatch

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by roterx7 &raquo;</TD></TR><TR><TD CLASS="quote">thats what i was afriad of, very pricey for 4 rubber o-rings for my injectors. Quality Auto, is there a website for them?</TD></TR></TABLE> There are actually 12 o-rings to repace 3 per injector, If you do all of them.

e jay one

maybe its different in other states but for the 4 o rings the only ones you should need to replace were a dollar something each at the dealership no parts store had them check out http://www.hondaautomotiveparts.com there o ring sizes on there i couldnt find those sizes anywere but the dealership.

eda6

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1QuikSOHCZC &raquo;</TD></TR><TR><TD CLASS="quote">


wow </TD></TR></TABLE>

i know. instead of spending over $40, making two trips to honda and having a week of downtime, i got the IM to injectors cushions for $1 from the junkyard, then went to home depot and spent $1 on o-rings.

saved myself $38 and had the car up and running in two hrs.

1QuikSOHCZC

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eda6 &raquo;</TD></TR><TR><TD CLASS="quote">

i know. instead of spending over $40, making two trips to honda and having a week of downtime, i got the IM to injectors cushions for $1 from the junkyard, then went to home depot and spent $1 on o-rings.

saved myself $38 and had the car up and running in two hrs.

</TD></TR></TABLE>

bought mine from the honda Dealership in my city. the same day i went. took me 10 mins to get there and buy them(yes they had them!). PLUS my cuzin works in the parts department. so i only had to pay 17.88 for gaskets/o-rings for all 4 of my injectors..........id rather have honda o-rings then home depot hahaha

took me 45 mins. thats it. and i saved money too but i have O.E.M goodness

DaX

iTrader: (1)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fireant &raquo;</TD></TR><TR><TD CLASS="quote">TIP: Old injector cushions fit perfectly onto the gearshift shaft to support a sagging shift boot. </TD></TR></TABLE>

Nice tip!