A kit for a d16a1 will fit any mpfi d16 (has same exhaust manifold, and nearly the same t-body placement). Eigher you have a ZC DOHC or a SOHC D16z6, either way it will work. The only reason it wouldn't work 100% is bacase the a1 is from an 86-87 teg, and I'm sure teh charge piping would be different. Regardless, the a1 swaps right into a crx, so I'm sure you'll be fine.
94 Integra LS (H2B H23A), 95 Coupe (turbo D16Z6) 92 Hatch (B16A2) try www.InjectorNation.com for 400cc-1000cc EV14 injectors
you have a z5, it was only available in europe, thats why you confused the ppl above. like already mentioned too, everything should bolt up fine. its a d-series so the ex mani will work fine, it is very similar to the jdm zc.
1999 Mercedes-Benz C43 AMG
2006 Subaru WRX STi
former EF Squad Member #11
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.