i need help about moonroof motor
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Long Island, NY, USA
Posts: 1,514
Likes: 0
Received 0 Likes
on
0 Posts
i need help about moonroof motor
hey my moonroof motor is pritty much dead and i want to knwo if anyone one knows of a thread they can send me that someone has changed one or if someone can tell me with pictures if possible in changing one... becuase i dont want too start riping **** apart and then be f***ed
thanks
thanks
#3
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Long Island, NY, USA
Posts: 1,514
Likes: 0
Received 0 Likes
on
0 Posts
Re: i need help about moonroof motor (1 Fly SI)
no im not sure but i need to know how to get to the motor so i can find out if the motor is getting any juice...
#4
Guest
Posts: n/a
Re: i need help about moonroof motor (1991 CRX Si)
dude i had this problem i took the whole roof apart to get to the motor by the way you have to take out the whole sunroof to even get close to the motor but anyway i replaced the motor and it ended up beig the switch the dude right check the switch first........if that does not work pull the headliner down by removing the pop pins with a flat head be carefull they break easily oh b4 you do that take off you rear view miror cap remve those screws ....you know what just let me know if you still need help and i will walk you through it
#5
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Long Island, NY, USA
Posts: 1,514
Likes: 0
Received 0 Likes
on
0 Posts
Re: i need help about moonroof motor (fast 91 hatch)
aight ill checkl the swith... i hope that its that.... but it will have to wait till tomorrow bc i was welding my exhaust and i went to go clean the welds a little bit and the grinding wheel exploded and fucked up my finger so right now im int a bit of pain... USE THE GAURD ON THE HAND GRINDER ... i didnt and now my finger hurts lol....
but anyways ill check it out and see if its the switch... bc i have to flick the switch a lot for it to work but then it only goes up a little it doesnt open fully anymore...
but anyways ill check it out and see if its the switch... bc i have to flick the switch a lot for it to work but then it only goes up a little it doesnt open fully anymore...
#7
Honda-Tech Member
Join Date: Aug 2006
Location: Right near the beach BOI, Ga
Posts: 2,246
Likes: 0
Received 0 Likes
on
0 Posts
Re: i need help about moonroof motor (Crx Jimmy)
I guarentee you it is the switch.https://honda-tech.com/zerothread?id=1218089
If you can't figure it out let me know.Also i messed up the pin you have to push out on the first switch I fixed and I used a finishing nail in its place. Just wanted to let you know that it is okay if you mess up the pin.
If you can't figure it out let me know.Also i messed up the pin you have to push out on the first switch I fixed and I used a finishing nail in its place. Just wanted to let you know that it is okay if you mess up the pin.
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Long Island, NY, USA
Posts: 1,514
Likes: 0
Received 0 Likes
on
0 Posts
Re: i need help about moonroof motor (1 Fly SI)
hey thanks ill try cleanig out the switch.... then ill let you knwo if it worked if not ... i dont know haha
#9
Junior Member
Join Date: Nov 2006
Location: Oregon, United States
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Re: i need help about moonroof motor (1991 CRX Si)
More often than not it will be the switch. Every so often someone posts about it going out. Suggestion: Junkyard a switch or OEM from Honda.
#10
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Long Island, NY, USA
Posts: 1,514
Likes: 0
Received 0 Likes
on
0 Posts
Re: i need help about moonroof motor (Sig.Arm)
hey thanks guys, i fixed the switch and it works 20 times better thanks for the save, but it stil slows down like the motor is dieing but atleast it works now.. thanks for the help guys!!!
Thread
Thread Starter
Forum
Replies
Last Post