Some thing's wrong here, traction bar install?!?!
#1
Some thing's wrong here, traction bar install?!?!
OK I went to install my full race traction bar on my crx and something is wrong because I can't get the bars lined up. I think either I have the wrong lower strut forks or wrong lca's on the car, can you tell by the pics?
#2
Honda-Tech Member
Join Date: Feb 2013
Location: san diego
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Re: Some thing's wrong here, traction bar install?!?!
ya i was thinking your lower strut fork looks a little strange, but installed my full race on a civic not a crx, but i dont remember my fork looking like that and i think we have the same lca.
#4
Re: Some thing's wrong here, traction bar install?!?!
Thanks for the pics, I'm pretty sure This shell has the wrong forks on it, they have a weird angle down by the bolt and the traction bar rubs like crazy
Trending Topics
#8
Honda-Tech Member
Join Date: Apr 2004
Location: Tacoma, WA, US
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Re: Some thing's wrong here, traction bar install?!?!
The gold radius arms are backwards. That end you have going into the control arm bolts up to the traction bar so flip it around. Hopefully it isn't one of those ones that bolt to the tow hitches. Those are trash!
#9
Honda-Tech Member
Join Date: Apr 2004
Location: Tacoma, WA, US
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Re: Some thing's wrong here, traction bar install?!?!
And those forks do look different, definitely not crx, they should just go straight up and down, not have a bend where it bolts up. Good luck!!
Thread
Thread Starter
Forum
Replies
Last Post
SE_Owner
Honda CRX / EF Civic (1988 - 1991)
2
02-25-2008 12:51 PM
SurfKid3
Suspension & Brakes
3
01-21-2006 11:28 AM