request for oxygen sensor replacement *searched*
#1
Thread Starter
Join Date: Mar 2004
Location: Mountainside, nj, usa
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
request for oxygen sensor replacement *searched*
after reading another topic about checking for a bad oxygen sensor, i need to replace my current one. does anyone have a guide or a how-to on how to replace the sensor? or is it as simple as:
0. disconnect battery
1. as unhook the sensor from the harness
2. use the oxygen sensor wrench and remove it from the header (stock in my case)
3. put in new sensor
4. reconnect harness to sensor
5. reset ecu/remove hazard fuse
thank you
0. disconnect battery
1. as unhook the sensor from the harness
2. use the oxygen sensor wrench and remove it from the header (stock in my case)
3. put in new sensor
4. reconnect harness to sensor
5. reset ecu/remove hazard fuse
thank you
#6
Honda-Tech Member
iTrader: (1)
Join Date: May 2004
Location: Riverside County 951, Ca
Posts: 4,538
Likes: 0
Received 2 Likes
on
2 Posts
Re: (cbp_crx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cbp_crx »</TD></TR><TR><TD CLASS="quote">yeah get the universal one, all you have to do is crimp your plug onto it, and it works really well, thats the one i have </TD></TR></TABLE>
i have a b16 swap which requires 2 02 senors, how will i go along with this if i buy the o2's you mentioned?
i have a b16 swap which requires 2 02 senors, how will i go along with this if i buy the o2's you mentioned?
#7
Honda-Tech Member
Re: (SiR Inspired ED7)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SiR Inspired ED7 »</TD></TR><TR><TD CLASS="quote">
i have a b16 swap which requires 2 02 senors, how will i go along with this if i buy the o2's you mentioned?</TD></TR></TABLE>
You just buy 2 universal sensors. The sensors themself are the same.
i have a b16 swap which requires 2 02 senors, how will i go along with this if i buy the o2's you mentioned?</TD></TR></TABLE>
You just buy 2 universal sensors. The sensors themself are the same.
Trending Topics
#9
Honda-Tech Member
iTrader: (1)
Join Date: May 2004
Location: Riverside County 951, Ca
Posts: 4,538
Likes: 0
Received 2 Likes
on
2 Posts
Re: (Autoworks)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Autoworks »</TD></TR><TR><TD CLASS="quote">
You just buy 2 universal sensors. The sensors themself are the same.</TD></TR></TABLE>
Ok...is there some type of DIY page to do this? I've never messed with the 02 Sensors
You just buy 2 universal sensors. The sensors themself are the same.</TD></TR></TABLE>
Ok...is there some type of DIY page to do this? I've never messed with the 02 Sensors
#10
Honda-Tech Member
Re: (SloS13)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SloS13 »</TD></TR><TR><TD CLASS="quote">wires are wires. Cut, splice, solder, heatshrink. It's not rocket surgery.</TD></TR></TABLE>
lol...rocket surgery...."scapple"
lol...rocket surgery...."scapple"
#11
Honda-Tech Member
Join Date: Oct 2005
Location: Dallas, Texas, U.S.A
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
Re: (SloS13)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SloS13 »</TD></TR><TR><TD CLASS="quote">wires are wires. Cut, splice, solder, heatshrink. It's not rocket surgery.</TD></TR></TABLE>
ohh ****
ohh ****
Thread
Thread Starter
Forum
Replies
Last Post
951parts
Honda Accord & Crosstour (2003 - 2012)
0
08-09-2012 11:43 AM