ok here is my project (warning 56K lots of pics)!!!!!
#1
Junior Member
Thread Starter
Join Date: Nov 2005
Location: usa
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
ok here is my project (warning 56K lots of pics)!!!!!
Ok lets go through a little bit of history first!!!! i got hooked on hondas in 99 and never
stop, and the rest is history after that!!! i was always into DA and DC to a point that there
was one time that i had 4 DA's and 95 GSR. one day i got sick and tired of having all this
car and decided to stripe on all up, get all the parts that i wanted out of then and
concentrate on only one project. well i also had a 91 EF seating in my backyard, yeah i
now!!!! well i was like, forget the 95 GSR ill stripe it to, let me get all this DA's and
GSR's parts and all my Honda knowledge and dump on into that ef, ill get a better car out
of it!!! well with my mind finally set on a goal i started the project and this what i got so
far!!! by the way, im a certify mechanic so i do everything myself, and i mean everything
from the mechanics to electrical to everything, of course with the help of some friends
here and there!!! I got this chassis for $50.00 from a friend who is in jail right now. I
hope he is able to see what I did with his gift!
DA Power Mirrors
My budy William, besides letting me do this at his shop while keeping the car there in his
way for almost the whole winter, he is still helping me spray the car. That was
awesome!!!
Here's my setup!!! LS/vtec with LS cable tranny, ACT clutch and flywheel kit, Arizona
race mounts, full msd, B&M fuel pressure regulator, gauge and short shifter, buddy club
battery.
Some of my wife's photo art. She is the best!!!!!!!!!!!
Next to the H22 EG that I built for my friend
For suspension, I got '95 GSR suspension and brakes setup all the way around. Also,
GSR brake booster and DAs proportioning valve, skunk2 springs, energy suspension
bushings, DA sway bars, full camber kit, front and rear upper tie bars.
My faithful little helper!! My son and superboy, Denzel!!
That's it for now. The best is yet to come! I'll keep you guys posted. Thank you very
much wife for helping me do this at 4:54 am
stop, and the rest is history after that!!! i was always into DA and DC to a point that there
was one time that i had 4 DA's and 95 GSR. one day i got sick and tired of having all this
car and decided to stripe on all up, get all the parts that i wanted out of then and
concentrate on only one project. well i also had a 91 EF seating in my backyard, yeah i
now!!!! well i was like, forget the 95 GSR ill stripe it to, let me get all this DA's and
GSR's parts and all my Honda knowledge and dump on into that ef, ill get a better car out
of it!!! well with my mind finally set on a goal i started the project and this what i got so
far!!! by the way, im a certify mechanic so i do everything myself, and i mean everything
from the mechanics to electrical to everything, of course with the help of some friends
here and there!!! I got this chassis for $50.00 from a friend who is in jail right now. I
hope he is able to see what I did with his gift!
DA Power Mirrors
My budy William, besides letting me do this at his shop while keeping the car there in his
way for almost the whole winter, he is still helping me spray the car. That was
awesome!!!
Here's my setup!!! LS/vtec with LS cable tranny, ACT clutch and flywheel kit, Arizona
race mounts, full msd, B&M fuel pressure regulator, gauge and short shifter, buddy club
battery.
Some of my wife's photo art. She is the best!!!!!!!!!!!
Next to the H22 EG that I built for my friend
For suspension, I got '95 GSR suspension and brakes setup all the way around. Also,
GSR brake booster and DAs proportioning valve, skunk2 springs, energy suspension
bushings, DA sway bars, full camber kit, front and rear upper tie bars.
My faithful little helper!! My son and superboy, Denzel!!
That's it for now. The best is yet to come! I'll keep you guys posted. Thank you very
much wife for helping me do this at 4:54 am
#2
Junior Member
Join Date: Jan 2007
Location: Scotland, Scotland
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Re: ok here is my project (warning 56K lots of pics)!!!!! (allhonda)
Nice start - you've got your work cut out for that one
Should be awesome when you finish it
Should be awesome when you finish it
#5
Junior Member
Thread Starter
Join Date: Nov 2005
Location: usa
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
Re: ok here is my project (No2Pencil)
oh yeah!!! ill post those soon!!!
the plans are: seats from my GSR front and back, GSR instrument cluster. im also thinking about getting a crx dasch but i dont know jet. i would like to finish the suspencion and some other stuff first seens im planing to boost the car..
the plans are: seats from my GSR front and back, GSR instrument cluster. im also thinking about getting a crx dasch but i dont know jet. i would like to finish the suspencion and some other stuff first seens im planing to boost the car..
#7
Junior Member
Thread Starter
Join Date: Nov 2005
Location: usa
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
Re: ok here is my project (91CRXed)
i had not finish the paint cause i was short on money, then my friend william was like i have some paint there check it out and see what you think, when i saw it i thought the same thing you said, but then again i was like ok sure i need to finish anyways. the paint is a mix that he made and it has red flakes in it, i dont like to be to flashy but it has just the right amount of flakes you can not see on onless the light hits it!!
Trending Topics
#11
Honda-Tech Member
Re: ok here is my project (crxpwr1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by crxpwr1 »</TD></TR><TR><TD CLASS="quote">did you paint the engine bay?...also nice build </TD></TR></TABLE>
im really diggin' the color.
im really diggin' the color.
#12
Honda-Tech Member
damn bro you got it all, a good wife, a son, and a Honda project! Sounds like life is good!
Is that copper or Gold paint? Im color blind so its tricky, but it looks copperish to me. If so, I'd name your Hatch Abe, it reminds me of a penny.
Nice build man KUTGW
Is that copper or Gold paint? Im color blind so its tricky, but it looks copperish to me. If so, I'd name your Hatch Abe, it reminds me of a penny.
Nice build man KUTGW
#13
Junior Member
Thread Starter
Join Date: Nov 2005
Location: usa
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
Re: (G0crxG0)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by G0crxG0 »</TD></TR><TR><TD CLASS="quote">damn bro you got it all, a good wife, a son, and a Honda project! Sounds like life is good!
Is that copper or Gold paint? Im color blind so its tricky, but it looks copperish to me. If so, I'd name your Hatch Abe, it reminds me of a penny.
Nice build man KUTGW</TD></TR></TABLE>
is of a more copper than gold
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by crxpwr1 »</TD></TR><TR><TD CLASS="quote">did you paint the engine bay?...also nice build </TD></TR></TABLE>
not jet but im planning ta do a wire tuck, ill pull the motor for that and ill do it then
here is a pic of the 95 GSR dash installed!!!
Is that copper or Gold paint? Im color blind so its tricky, but it looks copperish to me. If so, I'd name your Hatch Abe, it reminds me of a penny.
Nice build man KUTGW</TD></TR></TABLE>
is of a more copper than gold
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by crxpwr1 »</TD></TR><TR><TD CLASS="quote">did you paint the engine bay?...also nice build </TD></TR></TABLE>
not jet but im planning ta do a wire tuck, ill pull the motor for that and ill do it then
here is a pic of the 95 GSR dash installed!!!
#18
Honda-Tech Member
Join Date: Feb 2006
Location: Edmonton Alberta, canada
Posts: 3,519
Likes: 0
Received 1 Like
on
1 Post
Re: (Jonknee)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jonknee »</TD></TR><TR><TD CLASS="quote">damn perfect fitment on the gauge cluster, looks good, the whole build is going to be nice </TD></TR></TABLE>
i wouldnt call it perfect. its crooked. colour isnt what i woulda picked.. but good body work.. looks pretty straight.. good job
i wouldnt call it perfect. its crooked. colour isnt what i woulda picked.. but good body work.. looks pretty straight.. good job
#19
Honda-Tech Member
Re: (janz3n)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by janz3n »</TD></TR><TR><TD CLASS="quote">
i wouldnt call it perfect. its crooked. </TD></TR></TABLE>
thats what I was gonna say, but I'd have to say, thats the most comprehensive pic I've seen of a GSR cluster in a EF shroud, to actually be able to see how it fits.
And if this is a copper machine, I'd for sure be callin it Abe.
i wouldnt call it perfect. its crooked. </TD></TR></TABLE>
thats what I was gonna say, but I'd have to say, thats the most comprehensive pic I've seen of a GSR cluster in a EF shroud, to actually be able to see how it fits.
And if this is a copper machine, I'd for sure be callin it Abe.
#20
Honda-Tech Member
Join Date: Feb 2004
Location: long island, ny, usa
Posts: 3,262
Likes: 0
Received 2 Likes
on
2 Posts
Re: ok here is my project (warning 56K lots of pics)!!!!! (allhonda)
i love what you did with the roof.
really looks clean.
if you plan on using the radio at all:
http://www.autotoys.com/x/cust...=2303
really looks clean.
if you plan on using the radio at all:
http://www.autotoys.com/x/cust...=2303
#21
Junior Member
Thread Starter
Join Date: Nov 2005
Location: usa
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
Re: ok here is my project (warning 56K lots of pics)!!!!! (allhonda)
first of all thank you guys for all the good remarks!!!!!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by doublethink »</TD></TR><TR><TD CLASS="quote">i love what you did with the roof.
really looks clean.
if you plan on using the radio at all:
http://www.autotoys.com/x/cust...=2303</TD></TR></TABLE>
hey man your read my mind i got one of those as soon as i erease the anttena hole on the body
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by G0crxG0 »</TD></TR><TR><TD CLASS="quote">
thats what I was gonna say, but I'd have to say, thats the most comprehensive pic I've seen of a GSR cluster in a EF shroud, to actually be able to see how it fits.
And if this is a copper machine, I'd for sure be callin it Abe.</TD></TR></TABLE>
yeah you guys are right it is crooked, but guess what that thing doesnt even mounted with brakects jet i just throwed on for the pic but it fits so nice and tied that you could even leave it like that if you wanted to, if the way if anybody needs
help with anithing you see done here just let me know ill be glad to help!!!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by harmonator84 »</TD></TR><TR><TD CLASS="quote">Nice build man. I really like the gauge cluster too.
Hey if you need crx interior let me know. I have it in blue or black!</TD></TR></TABLE>
hey thanks for the offer man il keep it in mind
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by doublethink »</TD></TR><TR><TD CLASS="quote">i love what you did with the roof.
really looks clean.
if you plan on using the radio at all:
http://www.autotoys.com/x/cust...=2303</TD></TR></TABLE>
hey man your read my mind i got one of those as soon as i erease the anttena hole on the body
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by G0crxG0 »</TD></TR><TR><TD CLASS="quote">
thats what I was gonna say, but I'd have to say, thats the most comprehensive pic I've seen of a GSR cluster in a EF shroud, to actually be able to see how it fits.
And if this is a copper machine, I'd for sure be callin it Abe.</TD></TR></TABLE>
yeah you guys are right it is crooked, but guess what that thing doesnt even mounted with brakects jet i just throwed on for the pic but it fits so nice and tied that you could even leave it like that if you wanted to, if the way if anybody needs
help with anithing you see done here just let me know ill be glad to help!!!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by harmonator84 »</TD></TR><TR><TD CLASS="quote">Nice build man. I really like the gauge cluster too.
Hey if you need crx interior let me know. I have it in blue or black!</TD></TR></TABLE>
hey thanks for the offer man il keep it in mind
#22
Junior Member
Thread Starter
Join Date: Nov 2005
Location: usa
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
Re: ok here is my project (warning 56K lots of pics)!!!!! (allhonda)
i think you guys are right we'll call it the copper machine!!
and copper machine it is!!! anybody concurs?!?!?!?!
and copper machine it is!!! anybody concurs?!?!?!?!
#24
Honda-Tech Member
Join Date: May 2004
Location: A racetrack near you, CA, USA
Posts: 3,024
Likes: 0
Received 0 Likes
on
0 Posts
Re: ok here is my project (Ermil)
sweet project...i read that you said u were not finished with the paint process yet, are you planning on painting the bumper?