New Axle doesn't fit in Hub
#1
Junior Member
Thread Starter
Join Date: Jul 2005
Location: Richmond, VA, USA
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
New Axle doesn't fit in Hub
car is a 91 DX with a D15B engine/trans.
i just got new axles from advance auto parts because both my axles were gone.
the drivers side worked fine, but on the passenger side, the axle fits in the transmission, but it too small for the hub. you can just twist the axle and it doesn't grab the teeth inside the hub bearing. the old axle fit in it just fine.
there's obviously something wrong. why would the drivers side work, but not the passenger side? do i have two different hubs?
the axles are for a 1991 Civic Si.
i guess i need to get a new pass. side hub... are DX hubs the same as SI?
i just got new axles from advance auto parts because both my axles were gone.
the drivers side worked fine, but on the passenger side, the axle fits in the transmission, but it too small for the hub. you can just twist the axle and it doesn't grab the teeth inside the hub bearing. the old axle fit in it just fine.
there's obviously something wrong. why would the drivers side work, but not the passenger side? do i have two different hubs?
the axles are for a 1991 Civic Si.
i guess i need to get a new pass. side hub... are DX hubs the same as SI?
#2
Honda-Tech Member
Join Date: Sep 2002
Location: colorado springs, co, usa
Posts: 5,643
Likes: 0
Received 28 Likes
on
28 Posts
Re: New Axle doesn't fit in Hub (guedo148)
sounds to me like they gave you the wrong passenger side axle - the DX/Si axles are as large as they get on the hub end - if the axle is too small for the hub, it has to be the wrong axle, as there are no axles that are larger
#3
Junior Member
Thread Starter
Join Date: Jul 2005
Location: Richmond, VA, USA
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
Re: New Axle doesn't fit in Hub (jlicrx)
well i thought that might be the problem, so i already returned one axle and they gave me another Si axle and that one doesn't fit either.
maybe the hub splines are stripped or something. guess i'll just get a new DX/SI hub and see if the axle fits in there.
maybe the hub splines are stripped or something. guess i'll just get a new DX/SI hub and see if the axle fits in there.
#5
Stouts 'n' Scotch
It's also not outside the realm of possibility that the axles are just poorly manufactured. I've ran into that with a few sets of axles from them, that's why I only buy OEM now.
#6
Junior Member
Thread Starter
Join Date: Jul 2005
Location: Richmond, VA, USA
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
Re: New Axle doesn't fit in Hub (jlicrx)
there's the problem right there. just counted 23 splines.
i double checked the part number too and it was the one for a 91 Si.
crazy that they gave me the wrong axle twice in a row.
guess i'll go return this to Advanced and pick up the right axle for my car.
thanks for the quick help.
i double checked the part number too and it was the one for a 91 Si.
crazy that they gave me the wrong axle twice in a row.
guess i'll go return this to Advanced and pick up the right axle for my car.
thanks for the quick help.
#7
Honda-Tech Member
Re: New Axle doesn't fit in Hub (guedo148)
probably gave you the wrong axle. if its smaller then its probably a std axle. i have had that happen before, take it back and visualy check the size. make sure the one you get is bigger than the one you have. when i bought axles from napa they had the same part # but one was for a std hub.
Modified by nfereorhatch at 3:58 AM 8/28/2008
Modified by nfereorhatch at 3:58 AM 8/28/2008
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Jul 2005
Location: Richmond, VA, USA
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
Re: New Axle doesn't fit in Hub (nfereorhatch)
yeah that's exactly what happened. just got my money back and i'm going to a local parts store for the axle.
DX axles are the exact same as Si axles, correct?
DX axles are the exact same as Si axles, correct?
#9
Honda-Tech Member
Join Date: Sep 2002
Location: colorado springs, co, usa
Posts: 5,643
Likes: 0
Received 28 Likes
on
28 Posts
Re: New Axle doesn't fit in Hub (guedo148)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by guedo148 »</TD></TR><TR><TD CLASS="quote">DX axles are the exact same as Si axles, correct?</TD></TR></TABLE>yes, DX/Si/LX/EX are all the same
Thread
Thread Starter
Forum
Replies
Last Post
swarley
Transmission & Drivetrain
2
01-28-2011 06:56 AM