Re: NEED MAJOR HELP WITH ZC TIMING BELT!!! (HumanResource)
Originally Posted by HumanResource
the 2nd gen ZC (88-91) is the prelude unit with bigger cam gears
not true - the 2nd gen ZC is not a Prelude unit - it is a unique engine - all DOHC ZCs have same diameter cam gears as B-series or H-series - 34 teeth (timing marks are different, but they are the same size) - the 88 Prelude 2.0 Si timing belt and the DOHC ZC timing belt are identical and have the same part number 14400-PK2-004 - the belt has 124 teeth with 9.5mm pitch
Ok i think i got it. I looked over the book and i think i see what's up. But, the belt is almost or well it tuches the motor mount. The belt tenchiner bolt is at the bottom so it can't get any tighter. The belt say's 184 on the top. Maybe it's the wrong belt. Lets go for belt #5!!!
sorry to bump an old thread buy won't a Tbelt from an 89 integra work on a DOHC ZC?
edit: and yes i have looked thru all the archived posts
no, the DOHC ZC timing gears are smaller than the Integra - DOHC ZC cam gears have 34 teeth and crank gear has 17 teeth - the Integra cam gears have 40 teeth and the crank gear has 20 teeth - Integra belt is too long
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.