ned help with vtec wiring
05-07-2007, 06:36 PM
#1
Junior Member
Thread Starter
Join Date: Apr 2004
Location: 420 knollwood dr., ky, unitied states
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
ned help with vtec wiring
ok im down to one wire left to hook up and i need help. i have a 88 hatch with a mpfi wiring swap and a b16a obdo swap with a pr3 ecu. now i have a blue wire with a black stripe coming off the vtec silinoid. i cant find a blue wire with a black stripe anywhere else so does anyone know where to hook this up?
05-07-2007, 06:37 PM
#2
Honda-Tech Member
Join Date: Oct 2002
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
Re: ned help with vtec wiring (jdmhatch3)
U gotta run that wire directly to the ECU since it's not present in the factory harness.
Check the FAQ, should have directions on which ECU pin you need to plug it into.
Janos
Check the FAQ, should have directions on which ECU pin you need to plug it into.
Janos
05-07-2007, 06:38 PM
#3
Join Date: Dec 2003
Location: Salt Lake City, UT, usa
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
a little rusty but here goes.
that goes to pin a8 on the white connector. you might need to pin in the ecu, as most swaps here didnt come with vtec until the delSLO. b5 is the pressure switch. and the ground of the pressure switch-find a descent ground.
that goes to pin a8 on the white connector. you might need to pin in the ecu, as most swaps here didnt come with vtec until the delSLO. b5 is the pressure switch. and the ground of the pressure switch-find a descent ground.
Thread
Thread Starter
Forum
Replies
Last Post
Jakester9500
Honda Civic / Del Sol (1992 - 2000)
12
08-08-2007 05:25 AM
93(Civic)EG6
Honda Civic / Del Sol (1992 - 2000)
4
08-04-2007 06:10 PM
ilovemyb16a
Honda CRX / EF Civic (1988 - 1991)
3
05-18-2006 12:58 PM
