bodiez

I am finalizing my swap and I can not remember where I hooked the map sensor to. I am assuming that because I cant find it that i dont have a map sensor mounted to my TB, but I remember connecting the map sensor when I did my swap with my conversion harness by rywire.

I have a separate map sensor in my engine bay that I could mount pretty much anywhere, but I have no connector for it which leads me to believe that I connected the map connector to another map sensor which I cannot find.

Where is the map sensor exactly on the TB for a b16?

traxxasx

if it still obd-0 its on the fire wall, if its obdo its on top of the throttle body, if your is not you have wrong TB.

bodiez

TPS and MAP arent the same thing are they? because the map sensor and the TPS have the same connector.

ruffie_PL

No, they arent. MAP is manifold absolute pressure, TPS - throttle position sensor. Yes, both have same plugs but dont mix them

jlicrx

the MAP sensor connector is not on the engine harness, if you are looking for it there

lsdisco

Hey, I know this an old thread but I'm still trial and can't post a new one. I'm trying to finish my obd0 b16 swap in my 90 hf crx and am having trouble with vacuum routing. I found a diagram under b16 crx vacuum diagram but it doesn't really look like what I have going on. Also don't know where map sensor goes. I'm not a mechanic but have done this whole thing off of old threads and mostly from here. I'm just getting anxious and want to here her start so bad. If anybody can help with vacuum and map sensor that would be great. Sorry for using old thread.

magic60

nice info