hub slides into bearing

Reply Subscribe

Thread Tools

Search this Thread

04-13-2011, 07:58 PM

Creator

Honda-Tech Member

Thread Starter

iTrader: (1)

Join Date: Oct 2004

Location: NOVA, usa

Posts: 1,007

Likes: 0

Received 1 Like on 1 Post

hub slides into bearing

Ok so I'm doing my front wheel bearings and I'm concerned that the hub is toast. I can slide the hub half way into and out of the new bearing by hand. I would just buy new hubs, but I had an extra knuckle with hub sitting around and carefully hammered the hub out. It produced the same results.

Both hubs are wasted?

Reply Like

04-14-2011, 04:02 AM

tauumie

Honda-Tech Member

Join Date: Nov 2008

Location: Barrie, ontario, canada

Posts: 39

Likes: 0

Received 0 Likes on 0 Posts

Re: hub slides into bearing

hubs n spindle need to be pressed in by a machine. hammering them f*cks them

Reply Like

04-14-2011, 06:03 AM

Creator

Honda-Tech Member

Thread Starter

iTrader: (1)

Join Date: Oct 2004

Location: NOVA, usa

Posts: 1,007

Likes: 0

Received 1 Like on 1 Post

Re: hub slides into bearing

I'm versed in how to do a wheel bearing and hub(hub gets pressed into the bearing not the spindle). It is not me that damaged it or the hammering. You did not answer my question.

Reply Like