How to pull and clear CEL codes from your OBD0 ECU
#1
Honda-Tech Member
Thread Starter
How to pull and clear CEL codes from your OBD0 ECU
The diagrams below should be self explanatory.
If the ECU throws one or more of the below codes, then the next step is to reset the ECU (clear codes) to see whether any of the codes return after driving the car or cranking the engine for 30 seconds.
**Reset the ECU (clear codes) by removal of the 10A Hazard fuse from the hood fuse box for about 5 minutes.**
If the code(s) doesn't return immediately or eventually, then do nothing.
If the code(s) returns, troubleshoot the problem as described in the service manual. Or create a thread if you need help.
If the ECU throws one or more of the below codes, then the next step is to reset the ECU (clear codes) to see whether any of the codes return after driving the car or cranking the engine for 30 seconds.
**Reset the ECU (clear codes) by removal of the 10A Hazard fuse from the hood fuse box for about 5 minutes.**
If the code(s) doesn't return immediately or eventually, then do nothing.
If the code(s) returns, troubleshoot the problem as described in the service manual. Or create a thread if you need help.
Last edited by Former User; 01-24-2013 at 05:59 AM.
Thread
Thread Starter
Forum
Replies
Last Post
drumminforev
Honda Civic / Del Sol (1992 - 2000)
19
10-06-2006 12:12 AM