hatchinprogress

hey everyone im trying to take off my stock steering wheel (to install my quick release wheel kit) i do have a haynes manual and all it says is to remove retaining nut (no pit) well i tried with a 19mm nut but the nut will not budge.......so can anyone give me any pointers???

dr_latino999

Make sure the wheel is at full lock, then using a nice size wrench (18" should do) give it a spin. You may have to hold onto the wheel and stop it from trying to spin as this way you are not putting as much stress on the locking mechanism.

chivic

It really helps to use a 19 mm deep socket. I used my 2 foot breaker bar and held it with one hand. I also used some penetrating oil ,which helped greatly.

91civicEX

the manual says not to use the steering lock. it seemed pretty certain when i read it. but as we say at work "hey its not my car" it is a 19mm and there is no trick in taking it off but turning it.

Del Sol SiR

iTrader: (2)

use an impact or a breaker bar, remember, "lefty loosey, righty tighty".

hatchinprogress

thanks for the info ill go give it a try(again)

hatchinprogress

ok i got the retaining bolt off......now would anyone happen to know how to install a quick release hub kit?