VAAJ

anyone with hasport mounts ever try using the HCP ac bracket to obtain ac??? if it works then i'll rather buy the HCP bracket because the hasport bracket cost way too much $$$.

MOTOCOMPO

It should. Don't see why there would be a problem.

VAAJ

i'm concern because the hasport mount position the motor a little forward more then the HCP mounts. Anyone who has done this please confirm it so i can order the hcp bracket without worrying too much.

VAAJ

its going to be summer very soon.

wtsexton

It should work fine. But I have a hasport that I can cut a deal on for you.

Jonathan_ED3

I used HCP a/c bracket with Hasport mounts in my EG/H22. There was NO room at all. Took about 30 min just to get the compressor to line up, and when it did, it was sandwiched in there permanently. Just like on the EF/Bseries, Hasport puts the motor up closer to the radiator support with the H mounts.

Not to mention the vibration with the a/c on just plain sucked.

Why not go all HCP?

VAAJ

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jonathan_EH &raquo;</TD></TR><TR><TD CLASS="quote">I used HCP a/c bracket with Hasport mounts in my EG/H22. There was NO room at all. Took about 30 min just to get the compressor to line up, and when it did, it was sandwiched in there permanently. Just like on the EF/Bseries, Hasport puts the motor up closer to the radiator support with the H mounts.

Not to mention the vibration with the a/c on just plain sucked.

Why not go all HCP? </TD></TR></TABLE>


i would go all HCP, but then i have the hasport mounts already.

Fobtions

i would think the hcp ac bracket would work better on the hasport mounts better than their own mounts. the hcp position the motor alot lower then the hasports, and the compressor comes really close to the crossmember.