Half radiator help!
#2
Honda-Tech Member
Join Date: Jan 2008
Location: ct, 86zero
Posts: 689
Likes: 0
Received 0 Likes
on
0 Posts
Re: Half radiator help!
well i was looking this up...alot of people cut the two things that hold the rad up on the bottom of the rad support and then get two L brackets and weld them on lower so the half size rad doesn't sits high and so u don't have to lean the radiator back... this is the best why in my opinion and its more reliable...
#3
Honda-Tech Member
Join Date: Mar 2001
Location: Hilo, Hawaii
Posts: 4,136
Likes: 0
Received 0 Likes
on
0 Posts
Re: Half radiator help!
I would highly suggest getting an aftermarket traction bar. This will eliminate the stock front crossmember and free up a lot of room. Also look into a half sized radiator that is made to fit in the EF like the Full-Race half size radiator. A 95-99 Neon non A/C radiator fits very well too. However I never seemed to have much luck with it to keep my motor cool.
#5
Honda-Tech Member
Re: Half radiator help!
I would highly suggest getting an aftermarket traction bar. This will eliminate the stock front crossmember and free up a lot of room. Also look into a half sized radiator that is made to fit in the EF like the Full-Race half size radiator. A 95-99 Neon non A/C radiator fits very well too. However I never seemed to have much luck with it to keep my motor cool.
#7
Re: Half radiator help!
ya well im planin on droppin in a b20 vtec turbo and the room with that is not alot haha...found a top mount turbo manifold that kicks it to the side a little bit to and ill have more then enough room if i put in a half radiator opposed to a full radiator
Thread
Thread Starter
Forum
Replies
Last Post
aasaa666
Honda Accord (1990 - 2002)
3
10-22-2007 08:15 PM