Grounding point...
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2011
Location: Blair, NE
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Grounding point...
Been having starting problems with my crx...can i get places where there should be grounds and pics to go with it...trying to knock possible problems off the list... thank you
#2
Keyboard Humorist
Join Date: May 2002
Location: Granada Hills, Ca, USA
Posts: 9,814
Likes: 0
Received 9 Likes
on
7 Posts
Re: Grounding point...
Sounds like a backwards approach.
Might as well replace the brake lights and seats so you can check them off the list as well.
How about some detail about your car and the problem you are experiencing.
Might as well replace the brake lights and seats so you can check them off the list as well.
How about some detail about your car and the problem you are experiencing.
#3
Honda-Tech Member
Thread Starter
Join Date: Apr 2011
Location: Blair, NE
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Re: Grounding point...
well, my problem is that car only starts when starter is bridged...changed out main relay and clutch safety switch...making sure all grounds are where they are supposed to be...bought an si that someone had swapped a d15b2 w mpfi
#5
Honda-Tech Member
Thread Starter
Join Date: Apr 2011
Location: Blair, NE
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Re: Grounding point...
that passenger front one ground...where on the engine does it connect to? crx has a battery there...must be a pic of an eg/ek
#6
Keyboard Humorist
Join Date: May 2002
Location: Granada Hills, Ca, USA
Posts: 9,814
Likes: 0
Received 9 Likes
on
7 Posts
Re: Grounding point...
so...... why did you change out the clutch switch and main relay?
Were they diagnosed as faulty?
Since you can bridge the ignition switch wire and get the starter to crank, the main battery power and ground are obviously good.
Since you replaced the main relay and clutch switch, there isn't much left.
Wires and ignition switch.
Try troubleshooting the ignition switch wire and work backwards.
Were they diagnosed as faulty?
Since you can bridge the ignition switch wire and get the starter to crank, the main battery power and ground are obviously good.
Since you replaced the main relay and clutch switch, there isn't much left.
Wires and ignition switch.
Try troubleshooting the ignition switch wire and work backwards.
Trending Topics
#8
Keyboard Humorist
Join Date: May 2002
Location: Granada Hills, Ca, USA
Posts: 9,814
Likes: 0
Received 9 Likes
on
7 Posts
Re: Grounding point...
... or just maybe save some time and get a test light the check the wire before going through the hassle of changing a part that might be perfectly fine.
What if you have a bad wire????
What if you have a bad wire????
#9
Honda-Tech Member
Join Date: Jul 2008
Location: CRX nation, U.S
Posts: 4,437
Likes: 0
Received 0 Likes
on
0 Posts
#10
Honda-Tech Member
Thread Starter
Join Date: Apr 2011
Location: Blair, NE
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Re: Grounding point...
yes, i do need to get a test list or multimeter...planning on changing it out anyway...the tumbler unit and casing are from a different car...has 2 wires that were clipped when the civics didn't have the 2 wires....thought i had a pic of it on mu comp...but it was only on my phone
thanx luna link...gotta check to see if there is a ground on the trans
thanx luna link...gotta check to see if there is a ground on the trans
#11
Honda-Tech Member
Thread Starter
Join Date: Apr 2011
Location: Blair, NE
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Re: Grounding point...
heres a pic of the ignition lock and casing....
heres one of the stamping on the casing...
my accord one has sv4 so i know it belongs there...this one has k74...don't know what that is
heres one of the stamping on the casing...
my accord one has sv4 so i know it belongs there...this one has k74...don't know what that is
Thread
Thread Starter
Forum
Replies
Last Post
Black R
Acura Integra Type-R
23
04-08-2023 07:14 AM