Mr.Death

I took a look at my crank pulley and there are no marks for finding TDC. I guess I'll have to find TDC the old fashioned way by using a long screwdriver in cylinder #1 and turning the crank by way of ratchet until it reaches the top of it's stroke and determine weather or not it's on it's compression stroke by looking at the dizzy to see if the rotor is pointing to spark plug one. Sounds right or is there a better way of finding TDC on a sohc?

92integra_gs

is your timing belt still intact wid the cylinder head... cuz you can just do it that way too...

Mr.Death

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92integra_gs &raquo;</TD></TR><TR><TD CLASS="quote">is your timing belt still intact wid the cylinder head... cuz you can just do it that way too...</TD></TR></TABLE>

THe motor is still togeather.

92integra_gs

https://honda-tech.com/zerothread?id=1713354

here read this.. this one was just a thread created today... HTH

bluez6

where do you download the helms manual at?

SIred91

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bluez6 &raquo;</TD></TR><TR><TD CLASS="quote">where do you download the helms manual at?</TD></TR></TABLE>

I too would like to know

RockWolf

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bluez6 &raquo;</TD></TR><TR><TD CLASS="quote">where do you download the helms manual at?</TD></TR></TABLE><TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SIred91 &raquo;</TD></TR><TR><TD CLASS="quote">

I too would like to know</TD></TR></TABLE>

Ditto

jdm602

tdc on the cam is when the arrow is pointing straight up*

tdc on the rotating assembly are based on the lines on the crank timing gear (not the pulley) and the oil pump on the block. tdc is when the lines are matched up.

opps, sorry mods, just saw how old the post it. haha.

turbojdmhatch

tdc will say "UP" on the cam gear

the_woodcutter

with the cylinder head off wouldn't the piston be flush to the top of the block? oops, wait a second...at zero compression right? heck, i dunno...

jz98ctr

sheesh....if the engine is still together...try this "old-school" trick...
#1...pull the #1 spark plug wire out and #1 spark plug out of it's hole.
#2...get into car and put key in ignition.
#3...very quickly tap the key to the start position repeatedly and listen (or have a helper) listen for a loud CHUFF come out of the #1 cylinder bore. When you hear that noise...you are on compression stroke.
#4...you're welcome

apekd

First thing i would do is(with the belt on) turbo the crank till the cam gear is pointing the words UP, well, up. then pull the belt off, pull the #1 plug and move the crankshaft. you then will see if it is TDC or not.