91zSi

To remove side fenders, do doors need to be removed for the fenders to come off?
91 crx si

Reading off manual on removing fender, it doesn't say anything about the door.
Is it as easy as 1-2-3?
1. Raise the car
2. Remove tire/wheel
3. Remove inner fender cover and mounting bolts

Thanks.

slammedef8

no just the fender you can see teh bolts up the door when u open it

91zSi

Thanks, slammedef8.

I opened the door and tried put the socket through the gap b/t fender and door, and it wouldn't go through. I will try it later on.

slammedef8

use a wrench

EF9SIRJeff

aye dont use a socket extension through the crack in the door i Forked up my paint when i did that

Cuda70

I use a set of 1/4 inch sockets with a swivel extension. Never comes close to the door.

RCautoworks

http://www.rcautoworks.com/Fen...s.htm

91zSi

Thanks everybody for the helpful tips.

g24jr

usually nobody helps questions like this......hahhaha lol at the jack up the car and remove the wheel

Wes V

Maybe doing CRX fenders are a lot easier than a Hatchback, but here is what I have to do.

1. you have to remove the turn lights

2. you have to remove the front bumper and that includes the metal trim piece between the headlights.

3. remove the inner fender

4. then you can get to all the bolts around the fender

The reason for the front bumper having to be removed is to get to the bolts that are hidden there.

As stated before, you don't have to remove the doors. I use a wrench to loosen the two bolts behind the door leading edge and then 1/4" drive socket to remove the bolts the rest of the way.

It's a lot of stuff, but not hard at all.

Wes