Emergency Q. (axle nut size)
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2005
Location: Regina, saskatchewan, canada
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Emergency Q. (axle nut size)
quick! tomorrow morning i'll be replacing a new axle onto my 91 honda crx si 1.5ltr.
checked up on the FAQ and there's a thread on how to replace the axle on the car. (GREAT) tells me its a 32mm socket.
i need this verified...is it a 32mm socket? if so i need to go out and buy one before starting the replacement.
checked up on the FAQ and there's a thread on how to replace the axle on the car. (GREAT) tells me its a 32mm socket.
i need this verified...is it a 32mm socket? if so i need to go out and buy one before starting the replacement.
#2
Honda-Tech Member
Join Date: Oct 2006
Location: Gulf Coast, FL, usa
Posts: 657
Likes: 0
Received 0 Likes
on
0 Posts
Re: Emergency Q. (axle nut size)
You are correct sir,32mm. (and you can "rent" @ autozone + oreilly auto + get deposit back when done if not planning to use alot btw) And CA got 1.5 engine in Si models? most Si models were 1.6 d16a6 (and the almighty b16a elsewheres) what up with that?
#4
Honda-Tech Member
Thread Starter
Join Date: Jun 2005
Location: Regina, saskatchewan, canada
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Re: Emergency Q. (axle nut size)
sorry was a misprint, i have fat fingers, it was a 1.6ltr but i DO have a D15B vtec in my engine bay though :D
and thank you tyson and bigz for the confirmation! (fist bump)
today i'm overhauling my rotors and pads, new counter drive axle and oil pan gasket. should be fun. -_-
and thank you tyson and bigz for the confirmation! (fist bump)
today i'm overhauling my rotors and pads, new counter drive axle and oil pan gasket. should be fun. -_-
Thread
Thread Starter
Forum
Replies
Last Post
crxzcracer
Honda CRX / EF Civic (1988 - 1991)
15
09-21-2005 11:17 AM