90sedan

Alright so i just finished a passenger side wire tuck and i thought that my seat belt reminder was just going off, and i went to drive the car just now and i realized that they don't even work, hence the reminder light and beeper haha. Obviously this is a huge problem.

My question is, how do i fix this? The two 30a fuses on the power connector on the battery are good. What wires am i looking for? What wiring loom are they within. I just checked to make sure everything else works and it does, all the lights and the WW's do too.

Any help would be great!

Allday07

check to the left of the ecu..you prob def know where that is..if not, its under the passenger side carpet..its a silver box with two plugs going into it, see if there both plugged in snug and not cut anywhere

90sedan

I just checked and both the green and brown connector are in snug. None of those wires appear to be harmed.

Allday07

the only thing i can think off is look under the two seats, check if the wires came loose..if they are, re connect them

90sedan

They are.


I'm not sure how this had happened. I don't even know where to begin to look.

NastyHabitzCRX

iirc when you tuck, you may have removed a ground for the belts, re-check it

90sedan

Does anyone know where its grounded to? I'll re-check everything i can, but knowing where i should look first would be helpful.