Ef front lip ?
#2
Honda-Tech Member
Join Date: Dec 2005
Location: Toronto, Canada
Posts: 1,023
Likes: 0
Received 0 Likes
on
0 Posts
Re: Ef front lip ? (Awsom-o 4000)
It can fit the 90-91 front end after some modifications..
This is iheartteal's car from the EF Squad thread
and according to him:
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote »</TD></TR><TR><TD CLASS="quote">since its the jdmshit one, its made from polyurathane and very flexible, i used a heat gun (my sister blow dryer) and heat it up and stretched it around the side, it sucked and at first i thought i would never get it on. also u have to cut a little bit where the lip goes up to the grille</TD></TR></TABLE>
This is iheartteal's car from the EF Squad thread
and according to him:
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote »</TD></TR><TR><TD CLASS="quote">since its the jdmshit one, its made from polyurathane and very flexible, i used a heat gun (my sister blow dryer) and heat it up and stretched it around the side, it sucked and at first i thought i would never get it on. also u have to cut a little bit where the lip goes up to the grille</TD></TR></TABLE>
#5
Honda-Tech Member
Join Date: Dec 2005
Location: Toronto, Canada
Posts: 1,023
Likes: 0
Received 0 Likes
on
0 Posts
Re: Ef front lip ? (Awsom-o 4000)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Awsom-o 4000 »</TD></TR><TR><TD CLASS="quote">hmm thanks. im unsure if i want to try it now...thanks though</TD></TR></TABLE>
yeah it sounds like a biyatch to get that thing on
yeah it sounds like a biyatch to get that thing on
#7
Honda-Tech Member
Join Date: Dec 2005
Location: Toronto, Canada
Posts: 1,023
Likes: 0
Received 0 Likes
on
0 Posts
Re: Ef front lip ? (Awsom-o 4000)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Awsom-o 4000 »</TD></TR><TR><TD CLASS="quote">So no other lips for the stock front?</TD></TR></TABLE>
Nothing you can just buy and slap on instantly, most lips you're going to need to modify (but it isn't that much work)
Nothing you can just buy and slap on instantly, most lips you're going to need to modify (but it isn't that much work)
Trending Topics
#9
Honda-Tech Member
Join Date: Dec 2004
Location: Madison, WI, USA
Posts: 4,562
Likes: 0
Received 0 Likes
on
0 Posts
Re: (akandok)
RoadRaceGear makes a lip the bolts on directly to the 90/91 usdm hatch bumper. Otherwise you're stuck with OEM unless you want to modify something else.
#11
Honda-Tech Member
Re: (Awsom-o 4000)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Awsom-o 4000 »</TD></TR><TR><TD CLASS="quote">Will the oem one from a crx fit well?</TD></TR></TABLE>
they sell one for the civic too, (probably the same part #)
it should fit better than any other lip made for other vehicles.
they sell one for the civic too, (probably the same part #)
it should fit better than any other lip made for other vehicles.
#12
Honda-Tech Member
Thread Starter
Join Date: Feb 2005
Location: Portland, Oregon, USA
Posts: 1,094
Likes: 0
Received 0 Likes
on
0 Posts
Re: (grog)
Thanks. This may make me sound like a noob, but how do you order a part like that from honda? There website only deals with new stuff.
#15
Honda-Tech Member
Join Date: Dec 2004
Location: Madison, WI, USA
Posts: 4,562
Likes: 0
Received 0 Likes
on
0 Posts
Re: (crx_si-r)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by crx_si-r »</TD></TR><TR><TD CLASS="quote">civic and crx oem lips are different.</TD></TR></TABLE>
This is correct. Different part #'s. Here's a good place to get parts: http://www.hondaautomotivepart...y.jsp
You can also use other Honda/Acura lips and trim them to fit. I made a rear lip for my 90 hatch from an 86 Integra front lip.
This is correct. Different part #'s. Here's a good place to get parts: http://www.hondaautomotivepart...y.jsp
You can also use other Honda/Acura lips and trim them to fit. I made a rear lip for my 90 hatch from an 86 Integra front lip.
#23
Honda-Tech Member
Join Date: Apr 2005
Location: Where the wild things are in, NY, United States of America
Posts: 2,679
Likes: 0
Received 1 Like
on
1 Post
» Search Results
Your search for lip returned 23 results.
and that was quick search, in the CRX/EF forum.
(This is NOT bashing the OP)
There is WAYYYYY too many of these threads.... maybe we should add a sticky of lips and what they look like at the top?
Cause theres gotta be a better way then having almost 25 of these threads in under 4 months.
Your search for lip returned 23 results.
and that was quick search, in the CRX/EF forum.
(This is NOT bashing the OP)
There is WAYYYYY too many of these threads.... maybe we should add a sticky of lips and what they look like at the top?
Cause theres gotta be a better way then having almost 25 of these threads in under 4 months.
#25
Honda-Tech Member
Re: (civickiller)
http://www.jdmcarboy.com/index...3_737
Chargespeed makes direct bolton lips specifically for the 88-89 and 90-91 usdm civic and 88-89 and 90-91 usdm crx. They are identical to the j'sracing/passwordjdm jdm lips. Above is a link for the crx though. Pretty pricey though. I just use 88-89 integra front lip and trim the sides
Chargespeed makes direct bolton lips specifically for the 88-89 and 90-91 usdm civic and 88-89 and 90-91 usdm crx. They are identical to the j'sracing/passwordjdm jdm lips. Above is a link for the crx though. Pretty pricey though. I just use 88-89 integra front lip and trim the sides
Thread
Thread Starter
Forum
Replies
Last Post
cayey911
Honda CRX / EF Civic (1988 - 1991)
3
04-08-2008 06:07 AM
mr.scruffleston
Honda CRX / EF Civic (1988 - 1991)
18
10-25-2007 05:22 PM