ecu questions
#1
Junior Member
Thread Starter
Join Date: May 2005
Location: Reading, PA
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
ecu questions
i have a 1990 civic dx and i pulled the codes for the ecu. They were 16 and 8. When i looked them up, 16 was for the fuel injector, and 8 was for the tdc sensor. My check engine light isn't on anymore and i figured i would reset the ecu and then see if i will still get the same codes. how do i reset the ecu on my car? also, what would you suggest to do about those 2 codes anyway?
#3
Junior Member
Thread Starter
Join Date: May 2005
Location: Reading, PA
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Re: ecu questions (Suck my DX)
i have the chilton's manual for my civic, but when i was looking through it, it didn't really tell me which one was the hazard fuse. I saw one thing in a picture of a sample fuse box that was for the turn signals/hazard relay. is that for the hazard lights, is it that the one i want, or am i completely off target.
#5
Re: ecu questions (TougeCRX)
yes u can just unhook the negative battery terminal for 10 seconds as well...i think its easier to remove the hazard fuse but to each their own
Thread
Thread Starter
Forum
Replies
Last Post
9civic8
Honda Civic / Del Sol (1992 - 2000)
9
04-02-2004 08:51 AM