dual point computer
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2006
Location: Brighton, ontario, canada
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
dual point computer
Hey all just wondering if a dual point computer can be tuned or what other computers would work to gimme a lil more power as i have to leave my car dual point as it is for the race track and must remain stock, like i have a pm5 and pm9 computers right now jsut wondering if any other ones would be better. also i need a REALLY high rev limiter
#2
Honda-Tech Member
Join Date: Jul 2004
Location: VA, USA
Posts: 9,846
Likes: 0
Received 0 Likes
on
0 Posts
Re: dual point computer (civic46)
There is no point in chipping or modifying a computer to raise the redline of the engine has not been modified to accept a higher redline.
If you chip your ecu to raise the rev limiter, and go revving the **** outta your motor, then you'll probably blow it up because the valve train and rods are not designed to rev that high.
If you chip your ecu to raise the rev limiter, and go revving the **** outta your motor, then you'll probably blow it up because the valve train and rods are not designed to rev that high.
#4
Honda-Tech Member
Re: dual point computer (civic46)
The DPFI computer doesn't have the same hardware as the standard chippable computers, it's lacking the extra injectors drivers and some other items.
#6
Join Date: Mar 2007
Location: Deep In The Woods, Virginia, USA
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Re: dual point computer (civic46)
If you're running with strict guidelines like those switch up to a different car equipped with an MPFI system stock like a PM6 CRX si or whatever. Why are you racing with a DPFI system??? I'm just curious. Even if you could tune a DPFI system it wouldn't have anywhere near the precision tunability that an MPFI system would.
#7
$cat /dev/urandom
Join Date: Feb 2005
Location: Thornton, colorado, usa
Posts: 3,152
Likes: 0
Received 3 Likes
on
3 Posts
Re: dual point computer (backwoodsman)
i love when people ask about setting their rev limiter REALLY high.. then i can refer to my favorite thread ever on HT... https://honda-tech.com/zerothread?id=1277826
Thread
Thread Starter
Forum
Replies
Last Post