D16A6 in an '87 crx
04-16-2007, 10:37 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2007
Location: BFE, NC, US
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
D16A6 in an '87 crx
Will a D16A6 (1.6L) from a '90 crx si fit in an '87 and mount up to the tranny? I'm not sure if the 1st gen. crx's are hf, dx and si but I'd probably need the info on those too if they are.
I do know that the current engine in the '87 is a 1.5L
Thanks
I do know that the current engine in the '87 is a 1.5L
Thanks
04-16-2007, 11:05 AM
#2
Honda-Tech Member
Join Date: Sep 2002
Location: colorado springs, co, usa
Posts: 5,643
Likes: 0
Received 28 Likes
on
28 Posts
Re: D16A6 in an '87 crx (Booz)
no, D16A6 will not bolt to 1g CRX transmission - also, you would need to fabricate mounts to put the A6 into the 1g - if the 1g is not Si, then you would need the fuel system and most of the wiring from 1g Si - a D16A1 from 86-87 will be the closest thing that will work
04-16-2007, 11:26 AM
#3
Stouts 'n' Scotch
Re: D16A6 in an '87 crx (Booz)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Booz »</TD></TR><TR><TD CLASS="quote">Will a D16A6 (1.6L) from a '90 crx si fit in an '87 and mount up to the tranny? I'm not sure if the 1st gen. crx's are hf, dx and si but I'd probably need the info on those too if they are.
I do know that the current engine in the '87 is a 1.5L
Thanks</TD></TR></TABLE>
In other words, it's not an easy swap. I'd recommend a D16A1 from an 86-87 Integra like jlicrx said or a brown-top DOHC ZC.
I do know that the current engine in the '87 is a 1.5L
Thanks</TD></TR></TABLE>
In other words, it's not an easy swap. I'd recommend a D16A1 from an 86-87 Integra like jlicrx said or a brown-top DOHC ZC.
04-17-2007, 12:47 PM
#5
Honda-Tech Member
Thread Starter
Join Date: Feb 2007
Location: BFE, NC, US
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Re: D16A6 in an '87 crx (Booz)
Correction:
The car that the engine 'might' be going into is an 89 Civic hatchback DX. So I'd like to know the same thing, will a 1.6L engine (D16A6) from a 90 crx si fit in this car.
Thank you
The car that the engine 'might' be going into is an 89 Civic hatchback DX. So I'd like to know the same thing, will a 1.6L engine (D16A6) from a 90 crx si fit in this car.
Thank you
04-17-2007, 12:49 PM
#6
Honda-Tech Member
Join Date: Sep 2002
Location: colorado springs, co, usa
Posts: 5,643
Likes: 0
Received 28 Likes
on
28 Posts
Re: D16A6 in an '87 crx (Booz)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Booz »</TD></TR><TR><TD CLASS="quote">Correction:
The car that the engine 'might' be going into is an 89 Civic hatchback DX. So I'd like to know the same thing, will a 1.6L engine (D16A6) from a 90 crx si fit in this car.
Thank you </TD></TR></TABLE>yes, the engine will bolt right in - you will need to convert the wiring from DPFI to MPFI
The car that the engine 'might' be going into is an 89 Civic hatchback DX. So I'd like to know the same thing, will a 1.6L engine (D16A6) from a 90 crx si fit in this car.
Thank you </TD></TR></TABLE>yes, the engine will bolt right in - you will need to convert the wiring from DPFI to MPFI
04-17-2007, 12:54 PM
#7
Honda-Tech Member
Thread Starter
Join Date: Feb 2007
Location: BFE, NC, US
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Re: D16A6 in an '87 crx (jlicrx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jlicrx »</TD></TR><TR><TD CLASS="quote">yes, the engine will bolt right in - you will need to convert the wiring from DPFI to MPFI</TD></TR></TABLE>
Thank you
Thank you
Thread
Thread Starter
Forum
Replies
Last Post
classciv
Honda CRX / EF Civic (1988 - 1991)
1
01-04-2007 03:08 PM
hecktabite
Honda CRX / EF Civic (1988 - 1991)
7
01-14-2003 10:24 PM
