D15B6 Piston Specs?
11-03-2003, 07:48 PM
#1
Honda-Tech Member
Thread Starter
Join Date: May 2003
Location: Where the SOHCs play...
Posts: 1,343
Likes: 0
Received 0 Likes
on
0 Posts
D15B6 Piston Specs?
My gf's cousin has a D16Z6 with some HF pistons in it...said it gave it some nice compression. He's goin to be giving me the motor if this other guy doesn't buy it...so I wanted to see what I'm lookin at gettin. Where would the HF pistons sit compared to the other stock d-series pistons? Anyone have any specs on them or can tell me where to go?
11-03-2003, 08:28 PM
#2
Honda-Tech Member
Re: D15B6 Piston Specs? (H23 EG Hybrid)
wasnt the HF an 8 valve engine? people keep saying you cant use a 16 valve head with the 8 valve pistons because they interfere. ive never tried it though.
11-04-2003, 05:06 AM
#4
Honda-Tech Member
Join Date: Jun 2003
Location: mi
Posts: 1,466
Likes: 0
Received 0 Likes
on
0 Posts
the only way he has that done is if he cut new valve reliefs in the pistons. That would make the already weak HF pistons, even weaker. If i were you and wanted to go the cheap OEM piston route. Just get dx pistons. There .4:1 higher than the Si's.
11-04-2003, 05:20 AM
#5
Honda-Tech Member
Join Date: Sep 2002
Location: the asshole of america..., upstate new york, USA
Posts: 1,069
Likes: 0
Received 0 Likes
on
0 Posts
Re: (phatrick2332)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by phatrick2332 »</TD></TR><TR><TD CLASS="quote">Just get dx pistons. There .4:1 higher than the Si's.</TD></TR></TABLE>
do you know where to find the specs on the dx (d15b2) pistons? ie...compression height, piston-to-deck clearance, dish/dome volume?
do you know where to find the specs on the dx (d15b2) pistons? ie...compression height, piston-to-deck clearance, dish/dome volume?
11-04-2003, 05:41 AM
#6
Honda-Tech Member
Join Date: Jun 2003
Location: mi
Posts: 1,466
Likes: 0
Received 0 Likes
on
0 Posts
d15b2
stroke: 84.5mm
rod lenght: 134mm
rod/stroke ratio: 1.59
deck height: 212
total piston height: 61.76mm
compression height 30.70
and there is no dish/dome..there flat tops
stroke: 84.5mm
rod lenght: 134mm
rod/stroke ratio: 1.59
deck height: 212
total piston height: 61.76mm
compression height 30.70
and there is no dish/dome..there flat tops
11-04-2003, 09:16 AM
#7
Member
d15 pistons have the wrist pin in a slightly different location. you should get some pm7/p29 pistons (88-89 teg), or some 86-87 teg PGB6 pistons.. (i think thats right..)
Trending Topics
11-04-2003, 12:18 PM
#8
Honda-Tech Member
Thread Starter
Join Date: May 2003
Location: Where the SOHCs play...
Posts: 1,343
Likes: 0
Received 0 Likes
on
0 Posts
Thnx for the insite...hopeully his motor doesn't blow on me too fast. He's been running around on it for awhile now, so I should be ok. Do you have the compression height, piston-to-deck clearance, dish/dome for the D15B6 piston by chance also?
Thread
Thread Starter
Forum
Replies
Last Post
WhiteOnRice
Honda Civic / Del Sol (1992 - 2000)
18
05-22-2011 10:17 AM
smokinsi
Honda Civic / Del Sol (1992 - 2000)
9
07-25-2004 05:51 AM
