d15b2 mini me swap the right way!
#27
Re: d15b2 mini me swap the right way!
Ok, I am doing the "mini me" swap I have the "D15B2" engine the head and cam was bad so i figure it was a good time to swap. What parts do I need? I plan on doing the skunk2 intake manifold and the throttle body with a set of headers as well so the head and cam is what I really am asking for plus any thing extra. I also plan on going from 75mm bore to 75.5mm bore. Please help. I think it would be a fun project.
#29
Re: d15b2 mini me swap the right way!
Hello to everyone first off all im new to the whole honda exp.... I have always driven the American power Chevy fords wanted a lil change so i got my self 1995 civic coupe. Come with a d15b2 Manuel tranny where im confused is that every where i read it shows this motor as a non vtec... but my says vtec on the motor cover can someone sure some light
#30
Honda-Tech Member
Join Date: Feb 2012
Location: Chicago
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Re: d15b2 mini me swap the right way!
Look for the engine code stamped I. The Block. That will tell you the exact engine you have and you can then determine if you have vtec or not
Thread
Thread Starter
Forum
Replies
Last Post