I've got a question in regards to a problem I have been having with my spark plug wires.
For the last several weeks my plug wire on the number 3 piston keeps popping off the plug or "almost" off the plug because it does not stop the engine, just makes it run really rough. I have tried cleaning the cable and switching them around (at the cap aswell, of course) which worked ok untill I started driving hard and then I have the problem again.
So I was wondering if anyone knew what is happening and how I could fix it?
are they the right plug wires? i know when i tried installing a6 plug wires on my y8 head they didn't want to stay on and i had to trim them to fit properly.
are the spark plug seals in good condition? if you're getting a lot of compression leakage it will lead to high crankcase pressure, and that pressure is going to find the easiest way out. is your valve cover vent thats supposed to be plumbed into the intake connected properly, or by chance is it plugged off?
00 BMW 323i, black int, sport pkg, 5 speed
95 ej1, FnF1's, Morimoto Mini h1 retrofit,
GSR, bbk intake, BDL tb, t3/t4 10psi
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.