Bypassing 89 CRX si, Dashboard dimmer.
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2003
Location: Stockton, Cali
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Bypassing 89 CRX si, Dashboard dimmer.
Ok so my dimmer has gone bad, is there any way to just bypass the dimmer? could i just jumper the red, red/black wire that goes to the dimmer? also i read somewhere on HT that all light bulb on the cluster has to work to complete the circuits on a 88-89 cluster is that true? sound's kinda weird unless the light circuits is connected in series but, currently my dash light is not working and concluded that it's the dimmer.. so can i bypass it? thanks
#2
Honda-Tech Member
Join Date: Sep 2008
Location: SOMBREFFE, NAMUR, BELGIUM
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bypassing 89 CRX si, Dashboard dimmer.
Yes you can... From the back of the switch, cut the 2 black wires and solder them together... ( leave the red/black unused ).
In fact, the dimmer regulates the ground (-), by soldering the 2 black wires together, all your bulbs are directly connected to the ground and give full brightness...
As simple as that !
In fact, the dimmer regulates the ground (-), by soldering the 2 black wires together, all your bulbs are directly connected to the ground and give full brightness...
As simple as that !
#3
Honda-Tech Member
Join Date: Sep 2008
Location: SOMBREFFE, NAMUR, BELGIUM
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bypassing 89 CRX si, Dashboard dimmer.
PS : in some countries, 2nd ground is red... so in this case : solder the RED one with the BLACK one. ( in all cases, leave the RED/BLACK unused !!! )
That's it !
That's it !
Thread
Thread Starter
Forum
Replies
Last Post