90 sedan/b18a swap - pass radius rod is right on my tranny
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2012
Location: sanford,me
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
90 sedan/b18a swap - pass radius rod is right on my tranny
i have a 90 sedan wtih a b18a and my pass radius rod is right on my tranny when i slam my car down only way it doesnt hit is if im up about 2inches from bottom on my tiens. My question is do they make an aftermarket radius rod for the b series application or am i stuck fabricating one
#3
Re: someone must know the answer
if your mounts are good then maybe you should not be dropping the ride height ALL the way down...if you have to do that for some unknown reason then you probably will have to fabricate it.
Thread
Thread Starter
Forum
Replies
Last Post
b20vtech
Honda CRX / EF Civic (1988 - 1991)
2
11-07-2008 04:37 PM