88 DX wit MPFI , Sohc Vtec Dizzy ??????
#1
Honda-Tech Member
Thread Starter
88 DX wit MPFI , Sohc Vtec Dizzy ??????
basically i have an 89 hatch dx. it is already wired for MPFI because i had an integra ZC in it. i blew my dohc zc and am now putting in a d16z6. im not planning on going to obd1 so what distributor do i use?
#2
Member
any MPFI obd0 will work. they will all need modifying
88-91 crx HF
88-91 civic/crx si
90-91 integra b18a1
90-91 JDM b16A
all these will work with no problems, but each will need modifying to bolt to the d16z6 head properly. by modifying i mean you will have to put the distributor on the car with no bolts, check the timing, see how far you have to mnvoe the distributor so it is in time, and then cut, notch, or otherwise hack up the distributor legs however you can to make atleast 2 bolts fit. you only need 2 to hold it on.
Im using a d16a6 distributor on my b18a1 with no problems whatsoever.
Keep in mind that if you use the d15b6 HF distributor, its recommend to swap out the coil unit for one from one of the other cars i mentioned. the HF has a TC05-A numbered coli and all the rest are TC07-A, which leads me to belive the HF has a weaker coil.
88-91 crx HF
88-91 civic/crx si
90-91 integra b18a1
90-91 JDM b16A
all these will work with no problems, but each will need modifying to bolt to the d16z6 head properly. by modifying i mean you will have to put the distributor on the car with no bolts, check the timing, see how far you have to mnvoe the distributor so it is in time, and then cut, notch, or otherwise hack up the distributor legs however you can to make atleast 2 bolts fit. you only need 2 to hold it on.
Im using a d16a6 distributor on my b18a1 with no problems whatsoever.
Keep in mind that if you use the d15b6 HF distributor, its recommend to swap out the coil unit for one from one of the other cars i mentioned. the HF has a TC05-A numbered coli and all the rest are TC07-A, which leads me to belive the HF has a weaker coil.
Thread
Thread Starter
Forum
Replies
Last Post