Originally Posted by 24TEN
Hard to explain, even worse if you're not good with electrical stuff already. If it were me, I'd look up the wiring diagram and see if there's anything up/down stream between the switch and battery as a source of power. Then I'd get in there and start looking around for visual issues. I'd probably use a multimeter to see if I can track down the source. I hope someone else has an easier way to help you out because I doubt anything I said helped at all.
Alright, well here's what I did.
The break stopper pedal is brand new.
The break switch (with the plug on the back of it, has the little pressure switch on the front that hits the break stopper) is fully depressed, I even made sure by loosening the nut and then tightening the switch.
I tried unplugging the plug on the back of said switch.
I also checked all the fuses on my dash fusebox, nothing is blown.
I'm very lost. meh.