usdm.ehtu

Ok so heres the deal... I was un-installing my radio to re-wire it as some wires came loose. As I was re-wiring it some of the wires sparked cause the wire was exposed..they touched each other and some metal etc ( didnt take off the ground of my battery..which was stupid not to do, done this a few times had no probs..guess I'll learn now lol). Then all my dash lights went out along with my tails. Re-placed all the fuses I blew and now the only prob is the radio won't go on along with my clock. Radios still good but the wires that connect to it arent getting any power..along with my clock... do I need a new wiring harness or is there an easy fix?


-
-
-
-
***** Ok. I went out and bought a new wiring harness from the junk. installed it, replaced all the fuses and I still have the same problem. No Power to the radio and my clock isnt as bright as It used to be and It resests everytime I turn the car on...all the harness plugs are in the right spot so i dunno....****

hatchi

i would recheck all the fuses underdash and underhood. otherwise i would run a new 12 v power source for the deck

usdm.ehtu

The deck yea I'm just gonna run a new wire... how would I fix the clock tho? It's half as bright as it should be and it resets everytime. Is there something, a wire for the memory? I know I can just run a wire from the clock to the battery, but is there an alternate way of doing it? Don't really want a whole bunch of wires in my bay going to the battery.. got enough already lol

RED95EG6

might be the clock

NismoGriff

Fuse in the engine compartment labeled BACK-UP, should be a 7.5 amp fuse.....find it, replace it and your clock and radio memory problems should be solved.