window crank removal
#1
Thread Starter
Join Date: Jun 2004
Location: GTA, ontario, canada
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
window crank removal
I have a 1994 civic si 2 dr coupe and yesterday when i tried to do up the window, it got half way up and stuck (manual windows) I think it fell off the track but i can't get the window crank off to get inside the door?? Any idea's as to the problem or how to remove the crank would be great. Oh when the window would go up it would slide forward, towards the engine, leaving a gap. thanks
#2
Junior Member
Join Date: Feb 2004
Location: if it isnt rice then it aint, nice
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
Re: window crank removal (spicoli)
use a flat head screwdriver and push pin out and the crank will come out. watch out the pin will sometimes fly out.
#3
Join Date: Jul 2003
Location: PA/MD, where the potholes lay
Posts: 3,033
Likes: 0
Received 0 Likes
on
0 Posts
Re: window crank removal (eg92b16a2)
Once you remove the door panel. Check the window regulator. There is a possibility it could be bent. The rubber channel gaskets could also have rotted which keep the window glass on track.
#4
Thread Starter
Join Date: Jun 2004
Location: GTA, ontario, canada
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Re: window crank removal (spicoli)
thanks guys i managed to get a look inside and that rubber guide looks as if it has fallen off the track??? suggestions
#5
Join Date: Jul 2003
Location: PA/MD, where the potholes lay
Posts: 3,033
Likes: 0
Received 0 Likes
on
0 Posts
Re: window crank removal (spicoli)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spicoli »</TD></TR><TR><TD CLASS="quote">thanks guys i managed to get a look inside and that rubber guide looks as if it has fallen off the track??? suggestions</TD></TR></TABLE>
If the gasket doesnt appear to be rotted away along the track lining, slide it back into place. The window channel gasket is a very long piece. Squeeze it back and attempt to insert the window glass back in. You might need to fool around with it for a little while.
If the gasket doesnt appear to be rotted away along the track lining, slide it back into place. The window channel gasket is a very long piece. Squeeze it back and attempt to insert the window glass back in. You might need to fool around with it for a little while.
Thread
Thread Starter
Forum
Replies
Last Post
Morasso
Honda Civic / Del Sol (1992 - 2000)
2
09-10-2009 05:31 AM
B18cHatch06
Honda Civic / Del Sol (1992 - 2000)
8
07-18-2007 08:36 PM