jdmcivic2fast

92-95 civic EX,Dx,Si
96-00 civic dx,ex,hf
94-00 integra ls,gs,gsr,type r

my bushings are worn out on the front lca's want to just replace the whole arms because dont have access to a press. lmk thanks

bluebomber

iTrader: (2)

You should look into getting 92-95 EX or Si front LCAs, as these have sway bar mounting points on them if you ever want to add a front sway bar. The CX/DX didn't have a front sway bar, so they don't have them.

tlarimer

iTrader: (3)

98civdx

^^ Correct, you cannot run the 96-00 lca without the subframe, and a number of other things.

jdmcivic2fast

wat kinda things will it cause my car to do if the bushing on the front lca are worn out?
my car feels a little wobblely when acceleraing from 70-80+mph on the freeway

TheJGB3

You're just asking for trouble if you keep driving it this way...get it fixed

jdmcivic2fast

ive been driving it this way for years, couldnt figure out wtf it was, ive change new tires, balance a dozen times, new inner and outter tie rods, new shocks/springs, new axles, swap all mounts to good ones, change uca to good ones and still same problem. My boy told me that my bushing are f up on the front lcas so hopefully by changing them will solve this issue.