What Throttle Body what fits a d16z6 for better flow?
#1
New User
Thread Starter
Join Date: Feb 2001
Location: SC, United States
Posts: 244
Likes: 0
Received 0 Likes
on
0 Posts
What Throttle Body what fits a d16z6 for better flow?
I would like to upgrade my throttle bodyand I heard an Integra LS throttle body will bolt right in. Any truth to this?
thx
AL
thx
AL
#3
Honda-Tech Member
Join Date: Jul 2001
Location: FaRcyde
Posts: 3,310
Likes: 0
Received 0 Likes
on
0 Posts
Re: What Throttle Body what fits a d16z6 for better flow? (AL)
Bore out your stock throttle body and have the intake manifold port matched to the TB. I would recommend JG TB...runs about $150....same TB you send gets bored out or take a visit to your local machine shop and have them bore it out. The above is your best bet...not to many options.
#4
Member
Join Date: May 2001
Location: wetumpka al, us
Posts: 1,370
Likes: 0
Received 0 Likes
on
0 Posts
Re: What Throttle Body what fits a d16z6 for better flow? (Loco Honkey)
[QUOTE]ported (not polished) head [QUOTE]
ive heard good and bad things about polishing the head, on the quads we would polish the dome and exhaust ports but rough up the intake, the guy said it would allow the air/fuel/oil (2 stroke) to mix better and actually allow more air in the mix, now on all of the 4strokes ive seen, the whole head was polished to allow the fuel to flow faster to the head and from the 2 stroke we could tell a difference when we broke the head down and cleaning it, we could tell the motor flowed more freely. oh wait.. this was about just the TB, yea bore it out and then have it matched. b/c there would be a ledge to stop the flow, the main trick is free flow the motor,
ive heard good and bad things about polishing the head, on the quads we would polish the dome and exhaust ports but rough up the intake, the guy said it would allow the air/fuel/oil (2 stroke) to mix better and actually allow more air in the mix, now on all of the 4strokes ive seen, the whole head was polished to allow the fuel to flow faster to the head and from the 2 stroke we could tell a difference when we broke the head down and cleaning it, we could tell the motor flowed more freely. oh wait.. this was about just the TB, yea bore it out and then have it matched. b/c there would be a ledge to stop the flow, the main trick is free flow the motor,
#5
New User
Join Date: Sep 2001
Location: Westminster, CA, USA
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Re: What Throttle Body what fits a d16z6 for better flow? (Loco Honkey)
PROFESIONAL ADVICE: A Ported T-Body will make more power up high! BUT, you will lose low end power as well as torque. UNLESS you match that T-Body with a aftermarket cam of some sort. As far as "Loco Honkey" goes, thanks for slammin me on my previous thread!!!
[Modified by PACKIN PSI, 10:10 AM 9/6/2001]
[Modified by PACKIN PSI, 10:13 AM 9/6/2001]
[Modified by PACKIN PSI, 10:10 AM 9/6/2001]
[Modified by PACKIN PSI, 10:13 AM 9/6/2001]
#6
New User
Thread Starter
Join Date: Feb 2001
Location: SC, United States
Posts: 244
Likes: 0
Received 0 Likes
on
0 Posts
Re: What Throttle Body what fits a d16z6 for better flow? (AL)
Sorry for not getting back to you guys sooner, but I have a JRSC pushin 12psi, thats why I need some extra flow. Up until this point I have put up with a POS JG TB, they f'n suck. They dont idle for sh*t, wandering all over the place. When you hold up a "closed" JG TB to the sunlight, it will blind you! LOL
Actually, I found out that any 94-95 integra LS TB will bolt right up. Now I just have to find a good one!
AL
BTW, is this board so lame that it can't answer the question I posted? I come here for constructive questions and answers, not opinions, no wonder I dont come here often.
Actually, I found out that any 94-95 integra LS TB will bolt right up. Now I just have to find a good one!
AL
BTW, is this board so lame that it can't answer the question I posted? I come here for constructive questions and answers, not opinions, no wonder I dont come here often.
#7
Honda-Tech Member
Join Date: Jul 2001
Location: Miami, FL, USA
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
Re: What Throttle Body what fits a d16z6 for better flow? (AL)
I had my factory EG t/b bored to 58mm from http://www.ProFlowDesign.com for $140. I sent them mines...and they returned it within 3days. I'd recommend them anyday of the week before buying something else. Just goto their site, and tell them that you're sending yours off your car and they'll put a rush on it to get it to you as quickly as possible to minimize down time.
Thread
Thread Starter
Forum
Replies
Last Post
slide inside
Honda Civic / Del Sol (1992 - 2000)
1
10-21-2009 01:15 AM