skinney6

what do you all use?
and what do you use to gap them?
I put some NGK's in my girls accord and they had tiny electrode and for some reason it was a pain to gap accurately.

Dontoh

not exactly sure why, but many people swear by ngk's in hondas and nothing else

JuggerNaut-CTR

as long as you get the plugs the manual calls for, than it really doesn't matter what kind you use on a stock motor.

skinney6

the NGK that come when i put in my gx model are like $13 a piece
but i seems to run fine on regular plugs
thanks!

fragmare

NGK Platinum all the way. NGK Iridium plugs would be nice, but $10-11 a plug? GTFO...

98civdx

Regular old NGK plugs. just make you get the correct heat range, and gap them correctly.

cheese187

Ngk

fragmare

You gotta gap the higher end plugs (non copper) with a wire gapper. The coin type gapper will bend up the little electrode.

That being said, most NGK plugs come pregapped to .044 in. My motor calls for .043 in. Close enough to just check the gap and throw in there.

EyeHasSol

I run NGK plat plugs. They seem to be better than other brands I have used.