98EJ7Y8

this may sound dumb but what size door speakers come in a ex

grumblemarc

iTrader: (4)

Don't remember off hand but if you're shopping for speakers go here.
http://www.crutchfield.com/S-J2Cn21vBqhJ/
Use it as a guide for fitment only.

98EJ7Y8

thanks use to get this mag in the mail a while ago and they have great product

Former User

Please place simple technical questions directly into the thread title -- Title edited.

motegicivic

6 and 1/2 door, 6x9 rear deck.

Note the door is shallow depth, unless you cut the plastic cup.

sde780

"Regular" 6.5" speakers don't fit, I read you need the 5.25" ones. I know for sure that my Polk 6.5" components don't fit

98civdx

My Infinty 6.5's fit nicely.

You need to trim the plastic cup out for almost any speaker to fit.

hondamaster703

6.5 should fit perfectly.

jbpnoman

JL XR and ZR series speakers will require some serious fabrication to make them fit, just FYI, but damn do they sound good.

sde780

I stand corrected, standard 6.5" do fit. However "oversize" 6.5" do not, which may be the case with my Polks and several other speakers out in the market. That is not to say 5.25" will not fit; the OEM baffle even has 4 holes to bolt it on.

I knew I read somewhere about 6.5" not fitting...it's the oversized ones that don't.

motegicivic

Well some manufacturers, market speakers as 6.5/6.75 those are typically bigger.

98civdx

This is true.

I had some old kicker ds650's, what a PITA.
The terminals were on the sides, No way of getting them to fit without chopping up the pannel.


But, 9 times out of 10, the baffle, or the "cup" will need to be removed, unless you're speakers are pretty shallow.

Are you sure that isn't that issue? The cup takes minutes to remove.