918-Hatch

I searched and searched. Even went to apexi.com's website. I cannot figure it out. Anyone at all Please help. I am running a P28 obd1 ecu in a 92 cx hatchback. (b16) My wiring colors do not match what apexi.com or the manual shows.



Please help

918-Hatch

bump

OEM_ASSASSIN

https://honda-tech.com/zerothread?id=918703
^ That is a link for the wire colors for a H22A. I know you have a B16, but it should be close to the same.

http://asia.vtec.net/beystock/....html
^fields sfc-vtec insturctions. Yes, I know it is not the one you have but the picture can give you an idea on where some of the wires you need to tap are.

918-Hatch

Thanks man.

OEM_ASSASSIN

Those apex'i instuctions are pretty vague. I like the fields because it shows you exactly what pin it is

918-Hatch

BUMP .. for more info thanks for those who helped though. i feel like

EE_Chris

Which wire colors don't match? The picture you posted shows the wire colors for the VAFC harness, not the ECU wire colors. The link below shows no wire colors either, but does show which wire on the VAFC harness is to be connected to a particular ECU pin.

Are you following Diagram H3-a?

918-Hatch

Just found that.. thanks man