trouble mounting my ASR rear 24mm sway bar on my 2000 civic si
12-28-2007, 07:51 AM
#1
Honda-Tech Member
Thread Starter
Join Date: May 2004
Location: Alabama, USA
Posts: 4,716
Likes: 0
Received 0 Likes
on
0 Posts
trouble mounting my ASR rear 24mm sway bar on my 2000 civic si
Alright fella's, I ordered my ASR 24mm sway bar from weaksauce a few weeks back and decided to put it on tonight. I noticed while trying to line the holes up with the "D" brackets that the holes for the bolts were covered by the bracket when one bolt would go in.
To try and make better sense of it, only one bolt on each side of the D bracket would line up, and the other hole would be covered by the bracket.
This frustrates me, because i remember asking Weaksauce on the phone if the ASR sway bar would work with my Carbing rear lower tie bar, and they were firm with their assurance that it would work.
So I am asking, do I need to have the ASR subframe brace in order to run the sway bar?
To try and make better sense of it, only one bolt on each side of the D bracket would line up, and the other hole would be covered by the bracket.
This frustrates me, because i remember asking Weaksauce on the phone if the ASR sway bar would work with my Carbing rear lower tie bar, and they were firm with their assurance that it would work.
So I am asking, do I need to have the ASR subframe brace in order to run the sway bar?
12-28-2007, 07:58 AM
#2
Honda-Tech Member
Join Date: Oct 2007
Location: Walnut, CA, USA
Posts: 452
Likes: 0
Received 0 Likes
on
0 Posts
Re: trouble mounting my ASR rear 24mm sway bar on my 2000 civic si (Tuner Eddy)
I am pretty sure you might need ASR brace...are you sure you wanna install that gigantic bar without brace?...i think it would tear apart your subframe if you install it without brace
12-28-2007, 12:52 PM
#6
Honda-Tech Member
Thread Starter
Join Date: May 2004
Location: Alabama, USA
Posts: 4,716
Likes: 0
Received 0 Likes
on
0 Posts
Re: (C-West Civic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by C-West Civic »</TD></TR><TR><TD CLASS="quote">Pics??? I just did the ASR brace with a Cusco 24mm rear sway and it went on fine.</TD></TR></TABLE>
you got pics of your setup? i dont have any.
you got pics of your setup? i dont have any.
Trending Topics
12-28-2007, 02:48 PM
#9
Honda-Tech Member
Join Date: Jun 2003
Location: Dirty South
Posts: 410
Likes: 0
Received 0 Likes
on
0 Posts
Na cuz he is sayin that his D bracket is covering th other hole that it should mount up to.
Do you have the right size D brackets? You need the bushings and brackets from the ITR
Do you have the right size D brackets? You need the bushings and brackets from the ITR
12-28-2007, 04:59 PM
#10
Honda-Tech Member
Join Date: Feb 2006
Location: So Cal, Ca, US
Posts: 2,124
Likes: 0
Received 0 Likes
on
0 Posts
Re: (C-West Civic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by C-West Civic »</TD></TR><TR><TD CLASS="quote">Na cuz he is sayin that his D bracket is covering th other hole that it should mount up to.
Do you have the right size D brackets? You need the bushings and brackets from the ITR</TD></TR></TABLE>
Sorry about that was thinking about endlinks, not d brackets.
Do you have the right size D brackets? You need the bushings and brackets from the ITR</TD></TR></TABLE>
Sorry about that was thinking about endlinks, not d brackets.
Thread
Thread Starter
Forum
Replies
Last Post
exist12
Acura Integra
1
11-29-2009 10:52 PM
Tuner Eddy
Suspension & Brakes
12
12-28-2007 01:35 PM
