aflyingpanda

I just recently did a b16a swap in my 96 ek sedan. I haven't replace any mounts but the driver side and need to asap!

so my motor shakes like crazy and the plastic that goes to the plug to my tps sensor broke and then the tps gets disconnected and causes my car to bog and spazzes out like crazy and won't let me go past 2100 rpm.

I am not able to purchase mounts atm since i am low on cash and gotta wait til my next pay check to get them which is not for another two weeks.

What can i do to keep my tps from at least disconnecting and breaking. I was thinking of using gorilla super glue to glue the lil plastic piece back on but idk if that would hold up good enough. This is my daily so I need this car to get to and from work.

HELP PLEASE!!!!

aflyingpanda

so no one can help mee?

grumblemarc

iTrader: (4)

The fix is to get new mounts if your engine is shaking that violently. Anything else you do will be a hack job. You could probably use the universal fixit solution; duct tape.

itsnotfast

As grumblemarc said it would be a hack job but you could extend the wires. This would be a working fix but you really should just get the mounts. You'd be chopping a prefectly good harness and that never looks good.

EL MIGGZ

iTrader: (2)

Look at the plug, take note on the order the 3 wires go, unpin and connect straight into the tps. Should work if not go to the junkyard cut the plug off un pin and just swap the plugs.

EsotericImage

iTrader: (8)

1. Dont drive all crazy till you get mounts
2. buy mounts
3. replace mounts
4. fix/replace your TPS for the last time

you can get hardrace mounts for cheap

http://www.velocityshop.com/product/...civic_326.html

aflyingpanda

hmm extending wires would actually might be a good idea for now.

full race mounts are more expensive then innovative :\

EsotericImage

iTrader: (8)

Hard Race Mounts

click the link

aflyingpanda

I did my bad lol i didn't notice what I was typing. But yeah Hard Race.
They're like 280 and innovative from swap shop is only 250. And I heard lots of good from innovative

grumblemarc

iTrader: (4)

Whatever. What's wrong with OEM? Cheaper than both.

aflyingpanda

my motor is built. so when i take off my motor hops nasty

itsnotfast

Aside from suspension and wheels, mounts are the first thing I do to any of my cars.

beecee18

enery suspension, and/or prothane MM inserts for the stockers @ 30$ total

you will burn that much gas showing off your new swap

add to cart!



Ohh yeah,
thanks for the killer siggy!

jbpnoman

The motor hopping is not caused by a "built" motor, it's caused by blown mounts, and a driver who doesn't know what he's doing.

EL MIGGZ

iTrader: (2)

Roflmao!! Stock mounts + energy inserts FTW!

X2!