turnsignalandy

Who ever said that camber dosnt mess up your tire wear? The insides of my tires are bald while the outsides have a crap load of thread left. This is after i got my allignment.

stockfc

camber does affect tire wear, caster doesn't.

tallyturbo

^^^ i agree. get a camber kit off of ebay and call it a day

professor poon

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turnsignalandy &raquo;</TD></TR><TR><TD CLASS="quote">Who ever said that camber dosnt mess up your tire wear?</TD></TR></TABLE>

No one.

clint g

iTrader: (1)

get the skunk2 kit pull it all the way out and call it a day

kaiba

And toe kill the tire.

turnsignalandy

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by clint g &raquo;</TD></TR><TR><TD CLASS="quote">get the skunk2 kit pull it all the way out and call it a day</TD></TR></TABLE>
so if i pull the skunk 2 camber kit all the way out my camber will be at dead 0?

95jeremie

http://cgi.ebay.com/ebaymotors...%3AIT

this is all me on Monday dealt with the camber problems for about 2 years now (3 tiers per year on each side)

95jeremie

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turnsignalandy &raquo;</TD></TR><TR><TD CLASS="quote">so if i pull the skunk 2 camber kit all the way out my camber will be at dead 0?</TD></TR></TABLE>

no but it will be alot better

turnsignalandy

[QUOTE=95jeremie]http://cgi.ebay.com/ebaymotors...%3AIT

this is all me on Monday dealt with the camber problems for about 2 years now (3 tiers per year on each side)[/QUOT E]

ur askin 150,
I paid 150 installed

Targa250R

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turnsignalandy &raquo;</TD></TR><TR><TD CLASS="quote">Who ever said that camber dosnt mess up your tire wear? The insides of my tires are bald while the outsides have a crap load of thread left. This is after i got my allignment.</TD></TR></TABLE>
Post your alignment printout.

turnsignalandy

the guy at midas alligned the front to factory specs. Im pissed cause i spen 200 some bucks just so that i dont run in this problem. Could i go back to midas and make a big deal bout it. I specifically said 0 camber on the front.

.Ry

how do you know the TOE isnt back out?

FalkenSiR

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turnsignalandy &raquo;</TD></TR><TR><TD CLASS="quote">Who ever said that camber dosnt mess up your tire wear? The insides of my tires are bald while the outsides have a crap load of thread left. This is after i got my allignment.</TD></TR></TABLE>

Let's see the specs, Dr. suspension.
What did you tell them to do?
Did you just hand the keys?
How long after the alignment?
How bad was it before and after?

turnsignalandy

i told them 0 degree camber on the front. Its been about 2 months or so since i got it lowered. I got tein springs with skunk 2 camber kit up front. Took it to get alligned, told them 0 toe and 0 camber. I picked up the car, i asked them if they did what i asked and they said ya its factory specs. I looked at my front tires and the tirers are bald on the inside. For my rear tires i used some bigger bolts and it fixed the camber within .4 degrees of 0. The tires are worn pretty damn even. U think the guys at midas didnt tighten the camber kit enough and it un adjusted over time?

JDM-EJ1

You can noticeably tell if your camber is off. Just get behind your car and look at your tires. They should be like this: | |. Your's may be like this / \. Get an Ingalls, Skunk2, etc camber kit and be done with it.

instrument

people really dont read posts ehhh

that sucks that they're worn..but how did you not notice until they were all the way bald? Your car must be a little lowered so you definitely need to keep an eye on your tires...just turn the wheel every now and then...it'll take 10 seconds.

but seriously, most shops will show you a print out of your camber/toe when you brought it in, and where they got it...

when i was much younger i had a shop install my kit on my crx....they did a horrible job and the upper arm got stuck in the fender sheet metal...i had to pop it out and bang on it...

so yeah..don't just trust anything a shop tells you.

YeeJ6

check your toe angle, bad toe will wear tires down faster than exesive camber. post a pic of your car so we can see how bad your camber is


Modified by spoonspeed at 7:53 AM 4/30/2006

YeeJ6

Modified by spoonspeed at 7:52 AM 4/30/2006

turnsignalandy

I just noticed it when i took off my resonator, two days ago. But ya my right upper controll arm looked like it was scrapin against sometin. I dont know how to post pics here