For those of you wanting 8th Gen mufflers on yours 6th gen's.
07-30-2007, 05:52 PM
#1
Ek Forever y0!
Thread Starter
Join Date: May 2005
Location: Beating people with a stick, GA
Posts: 16,712
Likes: 0
Received 6 Likes
on
6 Posts
For those of you wanting 8th Gen mufflers on yours 6th gen's.
*******VIDEO'S ARE UP!!!******* Rev/idle and Driving!!!
Well, finally I got my 07 si muffler it arrived in clean condition, though I thought it needed a little touch-up and TLC. BTW, I got this for the look, and the fact that it had a straight through design and 2.25" inlet piping.
So, I got a car of semi-flat rust tough paint and got to masking.
Here it is masked up and sanded. Ready for paint.
Here it is after the 2nd coat.
And here's the finished product.
It's actually a very dark flat black.
And on to the sound clips. Before and after. The new muffler is silent at idle, and only make noise past ~4000 rpms. It sounds great while I'm driving. I also can tell that this muffler is not very restrictive, even on the *** dyno I couldn't tell a difference.
Okay, here are the videos.
Old
New
IMO, the videos don't do it justice, it sounds a lot better in person. My brother even thinks at lower RPM it sounds kind of like a g35's stock muffler does.
here it is driving.
Modified by ek forever guy at 12:09 PM 7/31/2007
Modified by ek forever guy at 12:10 PM 7/31/2007
Well, finally I got my 07 si muffler it arrived in clean condition, though I thought it needed a little touch-up and TLC. BTW, I got this for the look, and the fact that it had a straight through design and 2.25" inlet piping.
So, I got a car of semi-flat rust tough paint and got to masking.
Here it is masked up and sanded. Ready for paint.
Here it is after the 2nd coat.
And here's the finished product.
It's actually a very dark flat black.
And on to the sound clips. Before and after. The new muffler is silent at idle, and only make noise past ~4000 rpms. It sounds great while I'm driving. I also can tell that this muffler is not very restrictive, even on the *** dyno I couldn't tell a difference.
Okay, here are the videos.
Old
IMO, the videos don't do it justice, it sounds a lot better in person. My brother even thinks at lower RPM it sounds kind of like a g35's stock muffler does.
here it is driving.
Modified by ek forever guy at 12:09 PM 7/31/2007
Modified by ek forever guy at 12:10 PM 7/31/2007
07-30-2007, 05:54 PM
#2
Honda-Tech Member
Join Date: Nov 2005
Location: Pittsburgh, PA
Posts: 3,612
Likes: 0
Received 0 Likes
on
0 Posts
Re: For those of you wanting 8th Gen mufflers on yours 6th gen's. (ek forever guy)
next time try not to seizure when you're taking photos....haha jk EK 
looks good if it sounds good too (i'd imagine basically stock) then i wanna do it to my hatch!
looks good if it sounds good too (i'd imagine basically stock) then i wanna do it to my hatch!
07-30-2007, 06:02 PM
#4
Honda-Tech Member
Join Date: Sep 2002
Location: stevens point, WI, 54481
Posts: 2,940
Likes: 0
Received 0 Likes
on
0 Posts
Re: For those of you wanting 8th Gen mufflers on yours 6th gen's. (forcefedferio)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by forcefedferio »</TD></TR><TR><TD CLASS="quote">next time try not to seizure when you're taking photos</TD></TR></TABLE>
LOL!
In for some pics on the car and some sound.
LOL!
In for some pics on the car and some sound.
07-30-2007, 06:03 PM
#5
Stouts 'n' Scotch
Re: For those of you wanting 8th Gen mufflers on yours 6th gen's. (R Benefits)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by R Benefits »</TD></TR><TR><TD CLASS="quote">Looks good. You need to wipe off your tip </TD></TR></TABLE>
LOL.
In for pics / sound clip.
</TD></TR></TABLE>LOL.
In for pics / sound clip.
07-30-2007, 06:04 PM
#6
Ek Forever y0!
Thread Starter
Join Date: May 2005
Location: Beating people with a stick, GA
Posts: 16,712
Likes: 0
Received 6 Likes
on
6 Posts
Re: For those of you wanting 8th Gen mufflers on yours 6th gen's. (wiZCo)
I promise, I'll be getting a GOOD camera once the new job/school all settles in.
Trending Topics
07-30-2007, 06:22 PM
#8
Ek Forever y0!
Thread Starter
Join Date: May 2005
Location: Beating people with a stick, GA
Posts: 16,712
Likes: 0
Received 6 Likes
on
6 Posts
Re: For those of you wanting 8th Gen mufflers on yours 6th gen's. (FastLife617)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FastLife617 »</TD></TR><TR><TD CLASS="quote">Not bad up for sound clips and pix what are you going to throw it on ?</TD></TR></TABLE>
99-00 Ej6. Stock motor.
Replacing some catback the original owner had purchased.
what are you going to throw it on ?</TD></TR></TABLE>99-00 Ej6. Stock motor.
Replacing some catback the original owner had purchased.
07-30-2007, 06:27 PM
#9
Stouts 'n' Scotch
Re: For those of you wanting 8th Gen mufflers on yours 6th gen's. (ek forever guy)
Is the piping the same diameter as the stock exhaust? I may seriously consider doing this, just looked and the parts cost about $200, not a bad price vs. aftermarket stuff.
07-30-2007, 06:28 PM
#10
Re: For those of you wanting 8th Gen mufflers on yours 6th gen's. (R Benefits)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by R Benefits »</TD></TR><TR><TD CLASS="quote">Looks good. You need to wipe off your tip </TD></TR></TABLE>
You should wipe off his tip for him
Looks good... hurry up with the camera/sound clips you broke *** bish
</TD></TR></TABLE>You should wipe off his tip for him
Looks good... hurry up with the camera/sound clips you broke *** bish
07-30-2007, 06:29 PM
#11
Honda-Tech Member
Join Date: Nov 2006
Location: boston, MA
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
Re: For those of you wanting 8th Gen mufflers on yours 6th gen's. (ek forever guy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ek forever guy »</TD></TR><TR><TD CLASS="quote">
99-00 Ej6. Stock motor.
Replacing some catback the original owner had purchased.</TD></TR></TABLE>
nice im about to make my buddy order one too so we can replace his annoying fart can how much you got it for?
99-00 Ej6. Stock motor.
Replacing some catback the original owner had purchased.</TD></TR></TABLE>
nice im about to make my buddy order one too so we can replace his annoying fart can how much you got it for?
07-30-2007, 06:36 PM
#12
Ek Forever y0!
Thread Starter
Join Date: May 2005
Location: Beating people with a stick, GA
Posts: 16,712
Likes: 0
Received 6 Likes
on
6 Posts
Re: For those of you wanting 8th Gen mufflers on yours 6th gen's. (wiZCo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wiZCo »</TD></TR><TR><TD CLASS="quote">Is the piping the same diameter as the stock exhaust? I may seriously consider doing this, just looked and the parts cost about $200, not a bad price vs. aftermarket stuff.</TD></TR></TABLE>
I paid $100 shipped for mine from a guy here on h-t. Most of the 8th gen guys are letting the axlebacks go for about that.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FastLife617 »</TD></TR><TR><TD CLASS="quote">nice im about to make my buddy order one too so we can replace his annoying fart can how much you got it for?</TD></TR></TABLE>
See above. I looked in the 8th gen marketplace, in their tech forum.
I paid $100 shipped for mine from a guy here on h-t. Most of the 8th gen guys are letting the axlebacks go for about that.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FastLife617 »</TD></TR><TR><TD CLASS="quote">nice im about to make my buddy order one too so we can replace his annoying fart can how much you got it for?</TD></TR></TABLE>
See above.
I looked in the 8th gen marketplace, in their tech forum.
07-30-2007, 06:43 PM
#14
Stouts 'n' Scotch
Re: For those of you wanting 8th Gen mufflers on yours 6th gen's. (ek forever guy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ek forever guy »</TD></TR><TR><TD CLASS="quote">
I paid $100 shipped for mine from a guy here on h-t. Most of the 8th gen guys are letting the axlebacks go for about that.
</TD></TR></TABLE>
Great info. Let's see how she looks.
I paid $100 shipped for mine from a guy here on h-t. Most of the 8th gen guys are letting the axlebacks go for about that.
</TD></TR></TABLE>
Great info. Let's see how she looks.
07-31-2007, 09:03 AM
#18
Ek Forever y0!
Thread Starter
Join Date: May 2005
Location: Beating people with a stick, GA
Posts: 16,712
Likes: 0
Received 6 Likes
on
6 Posts
Re: For those of you wanting 8th Gen mufflers on yours 6th gen's. (95greenteg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 95greenteg »</TD></TR><TR><TD CLASS="quote">Would this be a straight bolt on on 6th gen?</TD></TR></TABLE>
No, muffler shop had to cut the piping at the muffler, and add on his own piece.
only cost me $40 for install, with two new hangers.
No, muffler shop had to cut the piping at the muffler, and add on his own piece.
only cost me $40 for install, with two new hangers.
07-31-2007, 09:19 AM
#22
Ek Forever y0!
Thread Starter
Join Date: May 2005
Location: Beating people with a stick, GA
Posts: 16,712
Likes: 0
Received 6 Likes
on
6 Posts
Re: For those of you wanting 8th Gen mufflers on yours 6th gen's. (excivicboy96)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by excivicboy96 »</TD></TR><TR><TD CLASS="quote">Whats the inlet diameter on that muffler?</TD></TR></TABLE>
2.25"
2.25"
07-31-2007, 09:21 AM
#23
Ek Forever y0!
Thread Starter
Join Date: May 2005
Location: Beating people with a stick, GA
Posts: 16,712
Likes: 0
Received 6 Likes
on
6 Posts
Re: For those of you wanting 8th Gen mufflers on yours 6th gen's. (Mr.EM1_EK)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr.EM1_EK »</TD></TR><TR><TD CLASS="quote">both vids are the same. nice mod though.
edit- nevermind</TD></TR></TABLE>
Yeah, got that fixed. I thought youtube had an auto copy feature. FTL
edit- nevermind</TD></TR></TABLE>
Yeah, got that fixed. I thought youtube had an auto copy feature. FTL
07-31-2007, 09:23 AM
#25
Junior Member
Join Date: Apr 2007
Location: west palm beach, us
Posts: 780
Likes: 0
Received 0 Likes
on
0 Posts
Re: For those of you wanting 8th Gen mufflers on yours 6th gen's. (ek forever guy)
sounds better. at least you have a stock look now. so not much attention from the police now huh.
