Tell Us What You Did To Your EG/EK/Del Sol Today
#2401
Honda-Tech Member
Join Date: Jul 2015
Location: Texas
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Re: Tell Us What You Did To Your EG/EK/Del Sol Today
not too much of anything but I changed the oil, adjusted my coils and washed her up. Gotta start off the week looking right!!
#2408
Honda-Tech Member
Re: Tell Us What You Did To Your EG/EK/Del Sol Today
First process of the bay got done today, Previous owner had k mount on and started this bay and fucked up so decided to cut **** out. put stock mount back on, cut and bent and welded a piece to go in, Shaped it good and put some fiberglass on it. She's all sanded now just dont got flicks
#2410
GDD's Resident Derp
Re: Tell Us What You Did To Your EG/EK/Del Sol Today
On mine, today I had another fail on attempting to remove a certain pulley. I'll leave it at that, as I may need to go back to the drawing board.
I even went so far as to purchase this large pipe that you see in the picture, as the hardware store does not cut pipe, and the other store didn't have a big enough pipe at all (?) and the heavier pipe cost like $60 that could go towards other efforts to continue my present work, so.
Even over my 24" breaker bar, that now has a distinct curve in it. Fail.
Until I have some kind of an update, that's all I got for now.
I even went so far as to purchase this large pipe that you see in the picture, as the hardware store does not cut pipe, and the other store didn't have a big enough pipe at all (?) and the heavier pipe cost like $60 that could go towards other efforts to continue my present work, so.
Even over my 24" breaker bar, that now has a distinct curve in it. Fail.
Until I have some kind of an update, that's all I got for now.
#2412
GDD's Resident Derp
Re: Tell Us What You Did To Your EG/EK/Del Sol Today
This one.. Look, "I don't know nor do I have any way of knowing" but this one I am confident would be one of THE most stubborn ones you ever saw.
My thread on the work to my car is at a standstill over this. Very. Thing.
I'm about to go the route of the IR.. because I too will not quit, give up, nor back down. That said. This one has me hanging my head in shame...
I'll PM you what I did to it today, and failed.
#2415
Re: Tell Us What You Did To Your EG/EK/Del Sol Today
I worked on my eg 4dr I was suppose to finish this summer so I a can take it to the track but there were a lot of bums during my build :cry
#2417
Re: Tell Us What You Did To Your EG/EK/Del Sol Today
Paint job my pops did about a year and a half ago is peeling right off. Not too happy about it. Got some touch up for the larger parts. Gonna start saving up for a new paintjob.
#2418
#2420
Honda-Tech Member
iTrader: (2)
Join Date: Sep 2007
Location: Norcal
Posts: 333
Likes: 0
Received 0 Likes
on
0 Posts
Re: Tell Us What You Did To Your EG/EK/Del Sol Today
I installed my new Energy Suspension shifter bushings. Cant say I noticed a huge difference but the vibrations are significantly less.
#2422
Honda-Tech Member
Re: Tell Us What You Did To Your EG/EK/Del Sol Today
I put this Permatex high temp silicone on my VTEC solenoid last year, then acouple days ago when I was checking all my fluids, I've noticed that there was some oil oozing out of the VTEC solenoid and trickling down the back of the motor and tranny.
So, I wiped out some of the oil and cleaned the VTEC solenoid. Then, I decided not to put the silicone again, instead, I bought a VTEC solenoid gasket from my local auto store for about $2.
So, I wiped out some of the oil and cleaned the VTEC solenoid. Then, I decided not to put the silicone again, instead, I bought a VTEC solenoid gasket from my local auto store for about $2.
#2423
Honda-Tech Member
Re: Tell Us What You Did To Your EG/EK/Del Sol Today
installed my new 97 del sol black door panels to my 94 del sol. and did the jdm maplight swap. Came out so good