MyDad'sCivic

why would you assume that lol? are you farsighted? The only reason i bought them is cuz i was really tired of the creaking sound. i know what ebay parts are and their consequences but dw in 6 month ill inform you what i did

eHMxhACk

iTrader: (17)

Not my EG, but DC2.

Snapped an exhaust manifold stud putting the stock header (exhaust manifold) back on. Decided today was the day to tackle removing it.








I got lucky! Came out clean. No damage to the head whatsoever.





eH.

bks84

iTrader: (9)

Finishing up a headgasket on an accord and then I'm putting power windows and locks in my buddies midori hatch

Jmarelt

Picked up all the necessary parts to do a 5 lug/ rear disc brake swap on my ES2 a few weeks back. Did a compression test last night and was hitting 140 psi in each cylinder. Until it gets warmer here in Ohio, it will be awhile till I can do anything else.

DieMaster

iTrader: (1)

got a 2000 civic from my grandmas trust. today put new tires, battery, windshield wipers on it, did an oil change, replaced some blown lightbulbs and cleaned the interor.

fourblades

Changed the headlight's design and function.

Admiral Beckett

Seems pretty rice IMO but I like your creativity, keep it up.

tony_2018

Pretty creative I will say that.

fourblades

That's what I was telling my cousin I'm turning it into ever since he gave it to me.

Admiral Beckett

Lol kingdom hearts theme as well? I liked the first one but nothing else after, maybe I grew out of it. But that doesn't stop me from digging out the ps2 and jamming that along with some Z.O.E. and shadow of the colossus.

EE2bitsk

so sick of the hazy lights so I took em off and restored them...

tony_2018

:thumbsup: on the clearing them up.

Jmarelt

What did you use?

CX-Adam

Buffing headlights. 👍

Just make sure you line them up when you reinstall them. I hate driving down the road and being blinded by people with wonky headlights.

Replaced my valve cover gasket and alternator belt.

EE2bitsk

wet sanded with 400, 600, and 2000 then sprayed them with clear coat.

mattyfo0z

About to change the oil, transmission fluid, and coolant since I just got the car and I'm not sure the last time maintenance was done on it.

stocker2shocker91

got the driver side quarter off. This side was for sure easier since I knew what to look for from the other side. Its coming a long nicely



I am going to completely coat the inside of these panels with some sort of rust inhibitive before I weld them on my other car. Either rubberized coating of some sort or maybe just a preventative rust primer because its lighter and thinner.

bottomedout

need help guys H23a swap in my 2000 coupe but it wont turn over I cant tell if the donor car I got the complete swap out of was obd2a or obd2b. all the dash comes on but no engine light no fuel pump sound and no crank, could I have the wrong interior harnesses. should I swap out all the harnesses that were removed from the donor car?? help plz

bks84

iTrader: (9)

Youre gonna get told to make a post in the tech section, but ima just say check your grounds transmission should have a ground to the body and then check the thermostat ground, check your starter signal wire thats in the engine harness.

doesnt matter what swap you put in these cars, the check system is always the same, check grounds. make sure theyre presnet, clean and tight.

bottomedout

I'm new the site won't allow me to make posts or threads. Being as this is my daily driver I'm kind of stuck on what to do.

bks84

iTrader: (9)

Do like I suggested, if you cant get it figured out call a local shop in your area.

bottomedout

Got it to turn over. My ground was in a poor spot on the transmission. Thanks

TomCat39

Just replaced the heater core in the flapper box I pulled from the 95 Civic EX Coupe I bought to strip.

New heater core is an aluminum unit, a bit thinner but I'm sure it will work fine and it will fix up my broken flapper box in my 95 CX Hatch.

The foam vent seals are so old and deteriorating. Trying to figure out what would be a good replacement that will last another 20 years or so.

It's actually REALLY easy to replace once you get the flapper box out of the car. Power steering can make that a touch more challenging than a non power steering car.




I'm thinking foam weatherstrip tape would probably work pretty well:

https://www.homedepot.ca/en/home/sea...erstrip%20tape

fourblades

Found some cheap LED and use them to add some footwell lights.



Driver side





Passenger side





Overall view





Center view

NotARaCist

iTrader: (1)

Doesn't look too bad. You might want to look into putting some kind of light diffuser around them though, so it's not so pointed.