civicnation93

Hey hey, I'm not sure if this question has been asked before or even answered on these forums but i'll ask anywho. I have a 93 Civic HB with the "common honda rust" on both sides...for those who dont know where that rust is and prolly not to many of ya...above the rear wheel wells..and a speckle or two at the lower/front part of the rear wheel well...both sides I might add. I already ordered the Rust Repair panels from http://www.rustrepair.com so that is covered. But what I want to know is, is there any places out there that make replacement panels or cutoffs for the INNER panels... the rust has eaten through both layers and im ready to start the work on this but would like some technical/experienced input on what would be best to do in this kind of situation. Im sorry if this is kind of a non-detailed description of the problem, i'll attach pic later Any input would be appreciated! Thank you!


P.S. (dumb question) Can someone explain the differences between EG/EK/EG6/9/EJ1 ?? I have no idea what any of that means, All I know is DX, CX, Si, EX, etc. Thanks again!

ke98248

iTrader: (1)

EG = civic's from 92-95
EK = civic's from 96-00'
EG6 is a civic from the 5th gen civic family...
EJ1 is a civic from the 5th gen civic family