93EH6

Hey guys i just installed a sparco steering wheel in my car but now my SRS light is always on is there any way to turn it off or do i have to take the light out and if so how do i get the cluster out???

King Tut33

I am sure there is a way to turn it off, but I just took the cluster out and unplugged the yellow SRS plug from the back.

93EH6

got a how to on taking the cluster out i have tried and i know that there is like a hidden svrew somwhere but i don't know where

aka010010

just pull the fuses. u dont need srs

redlinetuning

there are two screws holding the bezel.. then the rest snaps out.. then there are screws on each side and top and below the cluster. they are black screws with a phillips head. After that everything just falls out.. unplug the yellow harness and you'll be fine.

93EH6

k but i thought there was suposed to be a screw behind the clock or somthing but i couldn't get the clock out

Fraggle

IMO, id rather have an ugly stock wheel, than a nice one beacause of the SRS, its there for a reason and can save your life, im not worried about my driving, im worried about the other drivers.

cxSHOE

get the helms manual in the sig..... it will help

allmotaeg6

theres a screw when you take out the hazard switch

93EH6

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Fraggle &raquo;</TD></TR><TR><TD CLASS="quote">IMO, id rather have an ugly stock wheel, than a nice one beacause of the SRS, its there for a reason and can save your life, im not worried about my driving, im worried about the other drivers. </TD></TR></TABLE>

i actually got it to get rid of the srs cause i am going to have harnesses (yes i have a roll bar so don't even start) and with those the airbag won't help it will just be like a extra slap in the face if i crash

B2FiNiTY

iTrader: (2)

Unplug it or just remove bulb.

King Tut33

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by aka010010 &raquo;</TD></TR><TR><TD CLASS="quote">just pull the fuses. u dont need srs </TD></TR></TABLE>

That doesn't work. I pulled out the SRS fuses. You would have to pull the fuse for the gauges which will kill all them.