Sleeve and Tapping Help
#1
Sleeve and Tapping Help
Alright, I have a D16Z6 that has the bolt holes where the distributor is suppose to screw into stripped. I drilled them out but tapping to a larger bolt size will not allow me to fit the new bolts through the slots on my distributor. Also there is barely any room if at all to even get the tap handle to rotate, any tips or ideas would be great. I just want to get my distributor back on flush with no leaks but I still need the range of motion so I can set the timing of course.
Thank you
Thank you
#5
Thread
Thread Starter
Forum
Replies
Last Post