skunk2 manifold and iat
02-04-2005, 10:16 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2004
Location: Evlett, WA
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
skunk2 manifold and iat
I have a 98 civic and the IAT sensor is on the intake arm. with the skunk2 manifold its on the intake runner. which do i use?
02-04-2005, 10:33 AM
#2
Mr. Badwrench
Join Date: May 2002
Location: stranger in a strange land
Posts: 14,146
Likes: 0
Received 2 Likes
on
2 Posts
Re: skunk2 manifold and iat (b20izzle)
the one in the runner is for obd1 cars. use the one in the intake arm and block off the one in the runner. there should be a block off plate with the intake.
02-04-2005, 12:57 PM
#4
Honda-Tech Member
Join Date: Aug 2002
Location: repo.jackmoves., com, usa
Posts: 2,299
Likes: 0
Received 1 Like
on
1 Post
Re: skunk2 manifold and iat (b20izzle)
shouldnt have thrown a code on it no matter where it is. if its plugged in it shouldnt throw a code even if its just dangling around in the engine bay. if you extended the wires to run it ofer to the runner check your wiring and dont ouse those gay *** crim connectors on an engine harness.
Thread
Thread Starter
Forum
Replies
Last Post
